Skroutz.mt

Speroni CAM 88 Electric Surface Water Pump with Automatic Suction 1hp Single-Phase
Surface Water Pumps

Speroni CAM 88 Electric Surface Water Pump with Automatic Suction 1hp Single-Phase

Self-priming high-performance pump. Capable of pumping water from up to 8 meters depth. Ideal for use in potable water applications and pressure units.

Impeller Inox AISI 304. Pump body Inox AISI 304....

Self-priming high-performance pump. Capable of pumping water from up to 8 meters depth. Ideal for use in potable water applications and pressure units.

Impeller Inox AISI 304. Pump body Inox AISI 304. Pump flange Inox AISI 304. Shaft Inox AISI 304. Mechanical seal Ceramic/Graphite/NBR.

See full description See full description

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
  • Voltage Single-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
198 00 €
Delivery Wed, 24 Jun - Fri, 26 Jun
50,00 €   shipping cost
Sent from Greece
From Pazis 4.3 (4)
4.3 (4 reviews)
Greece
3 pieces
See Water Pumps on the page of Pazis
Review the product
Product report

Description

Description

Self-priming high-performance pump. Capable of pumping water from up to 8 meters depth. Ideal for use in potable water applications and pressure units.

Impeller Inox AISI 304. Pump body Inox AISI 304. Pump flange Inox AISI 304. Shaft Inox AISI 304. Mechanical seal Ceramic/Graphite/NBR.

The CAM 88 SPERONI is a single-stage centrifugal pump with a lightweight, monoblock construction.

The impeller operates in the hydraulic section of the diffuser, which is driven by the venturi tube. This is what makes the CAM 88 SPERONI pump stand out with its excellent suction performance from 8 meters.

The housing of the hydraulic section is made of stainless steel.

The motor housing and the pump base are made of cast iron.

The pump can be fixed to the ground thanks to the appropriate two support legs.

The pump can draw water without additional equipment as an independent device but can also be connected to an automatic machine.

Subsequently, the pump will automatically activate when the tap is opened and will shut off when it is closed.

Another option for connecting the pump is to install it with a pressure tank. Such a system will operate in the same way as in the case of the machine, but with the difference that there will also be water storage in the system (the size depends on the capacity of the tank). This means that the pump will start less frequently.

Technical specifications

  • Power: 1hp
  • Voltage: 230V
  • Connection ports: 1'' x 1''
  • Maximum head: 46m
  • Maximum flow: 3.6 m3/h
  • Two-pole motor 2800rpm
  • Protection IP44, Insulation class F

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Type
Single Stage

Type

Single Stage
They have a wing, making maintenance quite easy. They are suitable for low pressure operations where a high flow rate is maintained (e.g. irrigation).
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1 hp
Flow Rate
3.6 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
80 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Self-priming high-performance pump. Capable of pumping water from up to 8 meters depth. Ideal for use in potable water applications and pressure units.

Impeller Inox AISI 304. Pump body Inox AISI 304. Pump flange Inox AISI 304. Shaft Inox AISI 304. Mechanical seal Ceramic/Graphite/NBR.

The CAM 88 SPERONI is a single-stage centrifugal pump with a lightweight, monoblock construction.

The impeller operates in the hydraulic section of the diffuser, which is driven by the venturi tube. This is what makes the CAM 88 SPERONI pump stand out with its excellent suction performance from 8 meters.

The housing of the hydraulic section is made of stainless steel.

The motor housing and the pump base are made of cast iron.

The pump can be fixed to the ground thanks to the appropriate two support legs.

The pump can draw water without additional equipment as an independent device but can also be connected to an automatic machine.

Subsequently, the pump will automatically activate when the tap is opened and will shut off when it is closed.

Another option for connecting the pump is to install it with a pressure tank. Such a system will operate in the same way as in the case of the machine, but with the difference that there will also be water storage in the system (the size depends on the capacity of the tank). This means that the pump will start less frequently.

Technical specifications

  • Power: 1hp
  • Voltage: 230V
  • Connection ports: 1'' x 1''
  • Maximum head: 46m
  • Maximum flow: 3.6 m3/h
  • Two-pole motor 2800rpm
  • Protection IP44, Insulation class F

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Type
Single Stage

Type

Single Stage
They have a wing, making maintenance quite easy. They are suitable for low pressure operations where a high flow rate is maintained (e.g. irrigation).
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
No

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1 hp
Flow Rate
3.6 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
80 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

198,00 €
50,00 €   shipping cost