The MikroTik hAP lite TC operates as an access point with a built-in dual-chain 2.4 GHz wireless network and supports the 802.11b/g/n standards. It features four Fast Ethernet ports and runs RouterOS, offering bandwidth configuration, firewall and user access control capabilities. WPS is activated with a button, while pressing the button can switch it to cAP mode and connect it to a centrally managed CAPsMAN network.
Inside, it has a 650 MHz QCA9533 processor, a single core and 32 MB of RAM. The device has 16 MB of FLASH storage, a RouterOS L4 license and is powered via MicroUSB at 5 V. A USB power adapter is included.
- Type: Access point
- Wi-Fi generation: Wi-Fi 4
- Wireless networking standards: 802.11b/g/n
- Frequency: Single-band 2.4 GHz
- Maximum WLAN speed: 300 Mbps
- MIMO technology: 2x2
- Antenna gain: 1.5 dBi
- Maximum transmit power: 22 dBm
- Ethernet ports: 4
- LAN speed: 100 Mbps
- Processor: QCA9533 at 650 MHz
- Processor cores: 1
- RAM: 32 MB
- Storage: 16 MB FLASH
- Operating system: RouterOS
- RouterOS license level: 4 (L4)
- Power supply: MicroUSB, 5 V
- Maximum power consumption: 3.5 W
- Mounting: Desktop
- Usage: Indoor
- Packaging: Single kit
- Package contents: USB power adapter
Technical Specifications
- Frequency
- Single Band (2.4GHz)
- Maximum WLAN Speed
- 300 Mbps
- Wi-Fi Generation
- Wi‑Fi 4
- IEEE Networking Standards
- 802.11a, 802.11 b/g/n
- LAN speed
- 100 Mbps
- Wi-Fi Mesh Network
- No
- Ethernet Backhaul
- No
- Antenna Power (max)
- 1.5 dBi
- Transmit Power (max)
- 22 dBm
- PoE Support
- PoE
- MIMO Technology
- 2x2
General Characteristics
- Placement
- Indoor
- Ethernet Ports
- 4
- USB
- USB 2.0
- Packaging
- Single Kit
Installation Type
- Ceiling
- No
- Wall
- No
- Board games
- Yes
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.