Skroutz.mt

Pentax Electric Surface Water Pump Centrifugal 1hp Single-Phase
Surface Water Pumps

Pentax Electric Surface Water Pump Centrifugal 1hp Single-Phase Code: PM-80

Peripheral Pump PM 80M PENTAX

Peripheral volumetric pump with front suction suitable for small domestic and moderate industrial applications. It is characterized by a remarkable ratio between the...

Peripheral Pump PM 80M PENTAX

Peripheral volumetric pump with front suction suitable for small domestic and moderate industrial applications. It is characterized by a remarkable ratio between the offered performances and the required flow rate.

  • Cast iron body
  • Plastic impeller
  • Ceramic graphite seal
  • Stainless steel shaft AISI 416
  • Liquid Temperature: 0 – 90°C
    • ...
See full description See full description

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Centrifugal

    Pumps with impellers that enhance water flow.
  • Voltage Single-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
Review the product
Product report

Description

Description

Peripheral Pump PM 80M PENTAX

Peripheral volumetric pump with front suction suitable for small domestic and moderate industrial applications. It is characterized by a remarkable ratio between the offered performances and the required flow rate.

  • Cast iron body
  • Plastic impeller
  • Ceramic graphite seal
  • Stainless steel shaft AISI 416
  • Liquid Temperature: 0 – 90°C
  • Operating Pressure: max 8 bar
  • Two-pole motor with thermal protection
  • Protection grade IP44, insulation class F
  • Type: Self-priming
  • Power: 1 hp
  • Outlet: 1" x 1"
  • Voltage: 1 X 230V
  • Weight: 9.5 Kg
  • Flow Rate: 0.3 ÷ 3
  • Manometric Height: 61 ÷ 18
  • Series: PM

Flow Q K/W (m3/h):

  • 0, 0.3, 0.6, 1.2, 1.8, 2.4, 2.7, 3

Manometric Height H (m):

  • 65, 61, 56, 48, 39, 31, 25.1, 18

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
PM-80

Main Specifications

Type
Single Stage

Type

Single Stage
They have a wing, making maintenance quite easy. They are suitable for low pressure operations where a high flow rate is maintained (e.g. irrigation).
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1 hp
Power
750 W
Flow Rate
3 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
56 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Peripheral Pump PM 80M PENTAX

Peripheral volumetric pump with front suction suitable for small domestic and moderate industrial applications. It is characterized by a remarkable ratio between the offered performances and the required flow rate.

  • Cast iron body
  • Plastic impeller
  • Ceramic graphite seal
  • Stainless steel shaft AISI 416
  • Liquid Temperature: 0 – 90°C
  • Operating Pressure: max 8 bar
  • Two-pole motor with thermal protection
  • Protection grade IP44, insulation class F
  • Type: Self-priming
  • Power: 1 hp
  • Outlet: 1" x 1"
  • Voltage: 1 X 230V
  • Weight: 9.5 Kg
  • Flow Rate: 0.3 ÷ 3
  • Manometric Height: 61 ÷ 18
  • Series: PM

Flow Q K/W (m3/h):

  • 0, 0.3, 0.6, 1.2, 1.8, 2.4, 2.7, 3

Manometric Height H (m):

  • 65, 61, 56, 48, 39, 31, 25.1, 18

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
PM-80

Main Specifications

Type
Single Stage

Type

Single Stage
They have a wing, making maintenance quite easy. They are suitable for low pressure operations where a high flow rate is maintained (e.g. irrigation).
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
1 hp
Power
750 W
Flow Rate
3 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
56 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

109,00 €
26,00 €   shipping cost