Skroutz.mt

Pentax CAM-200 Electric Surface Water Pump Centrifugal with Automatic Suction 2hp Single-Phase
Surface Water Pumps

Pentax CAM-200 Electric Surface Water Pump Centrifugal with Automatic Suction 2hp Single-Phase Code: CAM-200M

Electric surface water pump from Pentax, suitable for use with clean water and liquids that do not corrode it. It is designed to pump water even in cases where there is air, providing a good water...

Electric surface water pump from Pentax, suitable for use with clean water and liquids that do not corrode it. It is designed to pump water even in cases where there is air, providing a good water flow at medium head. It is recommended for household and small irrigation uses, as well as for water distribution.

The pump should be installed in a closed...

See full description See full description

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Self-Priming

    The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.

  • Centrifugal

    Pumps with impellers that enhance water flow.
  • Voltage Single-Phase

  • Flow rate

    The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.

  • Manometric Height

    This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all
Review the product
Product report

Description

Description

Electric surface water pump from Pentax, suitable for use with clean water and liquids that do not corrode it. It is designed to pump water even in cases where there is air, providing a good water flow at medium head. It is recommended for household and small irrigation uses, as well as for water distribution.

The pump should be installed in a closed environment or at least protected from adverse weather conditions.

  • Body: Cast iron
  • Impeller: Plastic
  • Sealing: Ceramic graphite
  • Axis: Stainless steel
  • Fluid temperature: 0 - 90°C
  • Max operating pressure: 8 bar

Technical Specifications:

  • Power: 2 HP
  • Inlet nozzle: 1" 1/2
  • Outlet nozzle: 1" 1/4
  • Maximum head: 58m
  • Maximum flow rate: 7.2 m3/h
  • Weight: 25.5 KG
  • Single-phase

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
CAM-200M

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
2 hp
Power
1500 W
Flow Rate
7.2 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
58 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Electric surface water pump from Pentax, suitable for use with clean water and liquids that do not corrode it. It is designed to pump water even in cases where there is air, providing a good water flow at medium head. It is recommended for household and small irrigation uses, as well as for water distribution.

The pump should be installed in a closed environment or at least protected from adverse weather conditions.

  • Body: Cast iron
  • Impeller: Plastic
  • Sealing: Ceramic graphite
  • Axis: Stainless steel
  • Fluid temperature: 0 - 90°C
  • Max operating pressure: 8 bar

Technical Specifications:

  • Power: 2 HP
  • Inlet nozzle: 1" 1/2
  • Outlet nozzle: 1" 1/4
  • Maximum head: 58m
  • Maximum flow rate: 7.2 m3/h
  • Weight: 25.5 KG
  • Single-phase

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
CAM-200M

Main Specifications

Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
Yes

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
2 hp
Power
1500 W
Flow Rate
7.2 m³/h

Flow Rate

The amount of water that the pump can provide. For example, 6m³/h is equivalent to 100 liters/minute.
Manometric Head
58 m

Manometric Head

This is the distance from the suction point to the maximum height that the water reaches (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
Pressure
8 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

360,00 €
89,00 €   shipping cost