Skroutz.mt

Pentax CS-200 Electric Surface Water Pump Centrifugal 2hp Single-Phase
Surface Water Pumps

Pentax CS-200 Electric Surface Water Pump Centrifugal 2hp Single-Phase Code: CS 200

The Pentax CS-200 surface centrifugal pump is designed to pump clean water and liquids that do not corrode its materials. It features a single-impeller, open-type design and is intended for domestic...

The Pentax CS-200 surface centrifugal pump is designed to pump clean water and liquids that do not corrode its materials. It features a single-impeller, open-type design and is intended for domestic use, agriculture and applications requiring a high water flow rate. During operation, the flow rate ranges from 6 to 54 m³/h and the head from 6 to 13.8 m.

The...

See full description See full description

Top specs

  • Power Supply

    Electric

    Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly

  • Centrifugal

    Pumps with impellers that enhance water flow.
  • Voltage Single-Phase

  • Pressure

    The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).
  • See all

Learn more about invoicing
Review the product
Product report

Description

Description

The Pentax CS-200 surface centrifugal pump is designed to pump clean water and liquids that do not corrode its materials. It features a single-impeller, open-type design and is intended for domestic use, agriculture and applications requiring a high water flow rate. During operation, the flow rate ranges from 6 to 54 m³/h and the head from 6 to 13.8 m.

The casing and impeller are made of cast iron, while the shaft is made of AISI 303 stainless steel. The mechanical seal is made of ceramic and graphite, and the two-pole motor has thermal protection. The pump must be installed indoors or protected from adverse weather conditions.

  • Type: Electric surface centrifugal pump, single-stage and monoblock
  • Power: 2 hp (1.5 kW)
  • Power supply: Single-phase, 230 V / 50 Hz
  • Installation: Horizontal
  • Maximum flow rate: 54 m³/h (900 L/min)
  • Head: 6–13.8 m
  • Operating pressure: Up to 6 bar
  • Inlet/outlet connections: 2″ x 2″
  • Casing material: Cast iron
  • Impeller material: Cast iron
  • Shaft material: AISI 303 stainless steel
  • Mechanical seal: Ceramic and graphite
  • Liquid temperature: 0–90 °C
  • Motor: Two-pole, with thermal protection
  • Protection rating: IP44
  • Insulation class: F
  • Weight: 24.3 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
CS 200

Main Specifications

Type
Single Stage

Type

Single Stage
They have a wing, making maintenance quite easy. They are suitable for low pressure operations where a high flow rate is maintained (e.g. irrigation).
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
2 hp
Pressure
6 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Pentax CS-200 surface centrifugal pump is designed to pump clean water and liquids that do not corrode its materials. It features a single-impeller, open-type design and is intended for domestic use, agriculture and applications requiring a high water flow rate. During operation, the flow rate ranges from 6 to 54 m³/h and the head from 6 to 13.8 m.

The casing and impeller are made of cast iron, while the shaft is made of AISI 303 stainless steel. The mechanical seal is made of ceramic and graphite, and the two-pole motor has thermal protection. The pump must be installed indoors or protected from adverse weather conditions.

  • Type: Electric surface centrifugal pump, single-stage and monoblock
  • Power: 2 hp (1.5 kW)
  • Power supply: Single-phase, 230 V / 50 Hz
  • Installation: Horizontal
  • Maximum flow rate: 54 m³/h (900 L/min)
  • Head: 6–13.8 m
  • Operating pressure: Up to 6 bar
  • Inlet/outlet connections: 2″ x 2″
  • Casing material: Cast iron
  • Impeller material: Cast iron
  • Shaft material: AISI 303 stainless steel
  • Mechanical seal: Ceramic and graphite
  • Liquid temperature: 0–90 °C
  • Motor: Two-pole, with thermal protection
  • Protection rating: IP44
  • Insulation class: F
  • Weight: 24.3 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
CS 200

Main Specifications

Type
Single Stage

Type

Single Stage
They have a wing, making maintenance quite easy. They are suitable for low pressure operations where a high flow rate is maintained (e.g. irrigation).
Power Source
Electric

Power Source

Electric
Ideal for continuous and demanding operation (e.g. for a flooded field and/or basement) 2. More economical consumption than gasoline-powered pumps 3. More environmentally friendly
Placement
Horizontal
Automatic Suction
No

Automatic Suction

The engine is automatically activated when the water in the tank falls below the lower limit. Similarly, it is deactivated when the tank is filled.
Centrifugal
Yes

Centrifugal

Pumps with impellers that enhance water flow.
Firefighting
No
Power Type
Single-Phase
Set
No

Technical Specifications

Horsepower
2 hp
Pressure
6 bar

Pressure

The unit of measurement for the pressure exerted by the pump on the water (For example, for a height of 10 meters of water, a pressure of 1 bar is required).

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

330,00 €
83,00 €   shipping cost