First of all, all Einhell TC-TS 2025 with whatever follows is the same machine with or without extensions of the basic work surface. It is not ready to use straight out of the box (as the English speakers say). The guide is of poor quality, the measuring tape is inaccurate, it doesn't cut straight, etc. I knew all of these things before I bought it. You have to work with the tool to make it work. If you search on YouTube for the 2025 model, you will find many Do-It-Yourself solutions for the guide, how to align the blade, and general solutions to all the problems it has (Kjell-Olov Högdahl and Greek Giorgos Kolaretakis helped me). The tool has power and is a good value for your money if you put in the effort. The collection of sawdust is good (normal since I haven't dealt with any similar ones), but using the words of Izzy Swan, "There is no table saw that doesn't throw sawdust." Although for some reason I don't really like the manufacturing company, I still recommend it solely for its price. I bought it for €170 in 2018 from a well-known chain of technical stores. The only thing I regret is that I didn't thoroughly check it during the first week because mine had a not-so-obvious dent on the work surface (it drove me crazy because I couldn't align the blade, and I found it with a level and a flashlight). The dent is the reason why I give it 1 star less. For anyone who doesn't want to deal with it, they should look for something that exceeds €500. In the price range below €200 and with a 2-year warranty, there is nothing better. The last part may not be true because if I'm not mistaken, Einhell released a new model with a better guide (as they claim)

As a tool, it has power. I have been using it for 4 years and it has not let me down. Of course, with the purchase, it requires a new disk with more teeth. However, its main disadvantage is the accuracy, as it loses from everywhere, either in straight cuts or in inaccuracies. I wouldn't buy it again and would spend a little more money on something better!!!

I made a modification and put something from my workshop bench, so I have created new guides... the old guides were shaking, resulting in not cutting the same pieces. I have had it for about 2 years and after changing the disc and the guides, I can say that its power is sufficient for the hobbyist use I give it... it throws the sawdust behind unless it gets stuck and fills up, then it goes everywhere so it's good to have a connected vacuum... if you are in a small enclosed space...

Very good tool for the money. I changed the disk and put a better one with 60 teeth. I made several cuts on melamines and did not encounter any particular problem.

After 4 months, although I bought it with skepticism based on the previous reviews I read, in the end its cuts are accurate and without any problem. The only change it needs is in the blade because it has few teeth.

A machine that will never cut two pieces the same. The guides are terrible, there is no accuracy in anything. In order not to throw it away, I made a new table from plywood larger in dimensions (of course, I lost 18mm from the cutting height but it's okay) and new guides made of aluminum and iron profile, now I cut almost up to 60cm width. The disc it has on top is ridiculous compared to a professional disc. After changing the table, the guide, and the disc, I can say that it cuts perfectly. But with 145€ you get what you pay for. At least the guide should be correct regardless of the cost.

1 star because I had to correct some inaccuracies that the machine had, and that I was not obliged to do on a cutting tool and especially on its zero point. There was a 5mm deviation at the zero point. So I unscrewed the zero point and after 2-3 cuts I zeroed it correctly.

2). The cutting guide loses about 3 degrees, resulting in loss of accuracy towards the end of the cutting path. So I unscrewed the base of the guide and with an angle I brought it exactly where it should have been from the beginning (90 degrees). Good tightening on the screws, but despite all this, when you lock it where you want to make the cut, it moves again, resulting in not being able to make a proper cut.

It is quite noisy.

On the positive side.
Its power.
Dust collection is perfect. It does not throw any sawdust at all.
I made cuts without a vacuum cleaner in a closed space, and all the sawdust passed through the tubes and ended up together at the exit point at the back of the machine without throwing dust to the right and left.
The workbench is quite large and comfortable, and with a small patent you can extend it to the back.

Not recommended for purchase.