Used to make an SSD external for 4+ years without issues. Easy installation and good protection with the silicone case. Just be careful if used on a hard drive that generates high temperatures because it does not help at all with cooling.

Expectedly very good, just like everything I have bought from Icy Box over the years. Unfortunately, I have stopped finding screw-type Icy Box cases (e.g., IB-241WP) and these here sometimes open easily or do not close properly if you do not remove the (necessary) protections from inside.

It is a bit strange that the tire does not easily fit after "assembly" and that additional parts are needed to prevent the disc from playing inside the casing, but other than that, it does its job and that is what matters most.

Easy installation, just needs a little attention with the small teeth it has so they don't break.
The package also includes sponges to place them inside the case and prevent the disc from moving, a silicone case, as well as a small USB (about 30cm)

Very good but a little expensive case. I use it with a Samsung SSD, everything is fine! Good construction and shockproof. I would buy it again!

In order to insert a hard drive, because the method of closing the case lid is sliding, the disk must be placed at an angle, with the risk of bending the SATA cables. It also comes with two cushions in the packaging. One covers the thickness of thinner disks and one covers the length.
To prevent the disk from rattling and moving inside, you need to use a little bit of everything, which doesn't stay where you want it....meaning that after a while, the disk will probably move inside....
The silicone casing attracts dust and debris like a magnet...
The SATA to USB cable and its connection seem good...
The plastic covers are of mediocre to low quality...
I would not buy it again...

For the money, it is good! The lid is retractable and does not secure perfectly! That is, if you don't put the protective silicone, it keeps coming off! The cable is very short to the point that if you want to connect it to the back of the computer... you will definitely need an extension!

It is a very good value case that has a bumper all around for any high drop, it is okay for its price.

A note for those struggling with the adhesive sponge, it is only for the SSD, not for the "mechanical" disk. The SSD is thinner and this is to prevent it from "ringing" inside the slot :)

Very good case for an old hard drive that I removed from a laptop which I upgraded with an SSD. I bought it after reading the reviews on Skroutz.

Pros:
+ Beautiful exterior case.
+ The provided cushions help prevent the disk from moving inside the case.
+ The silicone case is good for preventing the disk from sliding.
+ Reliable USB connection - with a quick test using Crystal Disk Mark, it reaches the same speeds as when it was connected to the old laptop.
+ LED indicator for operation.
+ Satisfactory build quality for its price.

Cons:
- Requires some attention when opening and closing the plastic case, especially if the disk fits tightly.
- The silicone case tends to gather dust easily, but it's not a significant issue.

Very good case for the money, although it could be a bit cheaper (around €10). The quality of the plastic is quite good for its price and the hard drive fits properly inside. It comes with a rubber casing with extra reinforcement on the corners, as well as padding for the interior to prevent the hard drive from moving.

It has a blue LED to indicate that it is functioning/writing/reading data.

It has a USB 3.0 port that ensures fast speeds.

Something that might bother you, although it is not necessarily important, is that the connection cable is not the typical USB to USB, but a dedicated one, which means that you cannot use any other cables you have, and in case it breaks, it might be difficult to replace. However, in terms of quality, the cable is not an issue after several months of use.

Overall, a decent option to turn an extra hard drive into an external one.

fvm case for the hard drive you have thrown away in your drawer. Very good fit of the hard drive inside the case and the rubber casing properly embraces and protects the hard drive.

Good price, simple construction, works great.

I have purchased two of these HDD disks that I use for file storage and backup.

It is a sleek and affordable case. It comes with a detachable thin rubber casing that "embraces" the case quite well, it is shaped at the corners to reduce impact force in case of a fall (within reasonable limits!) and it is non-slip. It has a discreet blue LED as a read/write indicator.

I do not transport these disks, so I cannot have an opinion on durability or ease of transport, etc. Mine are located in a corner of the office and operate 24/7, downloading/transferring files and taking backups. This has been going on for about a year and a half without any issues.

Easy application without tools, proper stabilization of the disk inside the box, and additional protection against falls with the included cover. The box contains complete and detailed instructions that anyone can follow. The only thing left is to see how it will withstand over time.

An acceptable quality case for SATA SSD. Overall, the fit is not the best and the USB connector does not seem to be the most durable. But since I will have it permanently plugged in and stationary, I'm not too worried.

Easy installation of the hard drive.
Immediate recognition by the operating system (Windows 10, 64bit) without additional drivers, truly plug and play.
Does not slip.
Reads files very quickly.
I also bought a second case as I was satisfied with the first one.
Great value for money.

To be honest, I expected the elastic cover (the protective cover for the corners) to either snap on or be integrated with the case. But in the end, it goes on and off like a "glove" on top of it. It's not that negative, it does its job, protects from falls, it just moves a little and bothers me when I touch it.

Apart from that, it's very good, it's worth its money and more.

Very good case for her money! Easy installation of the disc, plug and play. The only drawback for me is the quality of the teeth that close the case. They need attention because they look and are fragile...

Very good case. It protects, especially with its elastic cover, it doesn't transfer vibrations from contact to the desk (and therefore quieter), practical with its blue light, very easy to install the disk, so much so that for a period I had it to constantly test if disks are working, etc. "plug and play". And finally, very aesthetically pleasing, although that is subjective. It's worth 100%.

Excellent case, at €15. I have it for 2 months.
I installed the hard drive that I replaced with an SSD, it went in without any problems with perfect fit using the provided support (on which you should not remove the sticker) and it works flawlessly and reliably on USB 3.0.
Recommended to keep your old hard drive alive!

The comments/complaints about the adhesive attachment and the protective rubber that have been made are as they say... nothing special in terms of quality of construction, but I have to acknowledge the flawless function + data transfer. For the money, it's fine (without having high expectations), 4 stars! However, I wouldn't buy it again, I would look for something a little more expensive and of higher quality.

For the money, I believe it is worth it.
The HDD was easily installed without needing the screwdriver that is included to prevent the 7mm disk from moving, and everything seems perfect in terms of performance and speeds that the USB 3.0 can achieve.

Excellent case mainly for one thing.... The ability to automatically close the disk when not in use and above all the smooth shut down of the disk when the power is cut off.... For example, I connect the case (with an internal hard disk installed) to the television and when I turn it off (TV), the disk shuts down smoothly, just like when we safely remove a USB from a PC and not abruptly... This is the reason why I bought it as I have loaded the disk with movies and play them on the television...

In terms of build quality, it is average, made of plastic.... Beautiful case but with a short and stiff cable.... Considering the price and its electronic components, it is value for money.... It's worth it..

I bought it to install a 1TB HDD from my laptop. The installation was easy, with no movement of the disk inside, and it works perfectly. The USB 3.0 works correctly and quickly. It has a rubber casing for protection against falls, which is positive, power supply from the USB, which is positive, and it is a German company, which is very positive for its quality and reliability. However, it comes with a very short and hard cable, which I consider negative. I bought it for about €15 and I believe that based on what it offers, it deserves 5 stars.

The disc does not fit inside the case. It has some cushions to better fit the disc, but unfortunately, when I place them, it doesn't snap.

I did not notice any difficulty or uncertainty in placing the USB as my little ear has heard here and there.
The case is very discreet and of course, the data transfer is quite fast.