Skroutz.mt

Telwin Technology Tig 230 DC-HF/LIFT Welding Machine Inverter TIG / MMA with Maximum Welding Current 220A and Duty Cycle 30%
Welding Machines

Telwin Technology Tig 230 DC-HF/LIFT Welding Machine Inverter TIG / MMA with Maximum Welding Current 220A and Duty Cycle 30%

TIG welding machine as well as electrode (MMA) direct current (DC) controlled by a microprocessor.

High-frequency HF or LIFT TIG with pulses (PULSE TIG-EASY PULSE).

Used on a wide range of materials...

TIG welding machine as well as electrode (MMA) direct current (DC) controlled by a microprocessor.

High-frequency HF or LIFT TIG with pulses (PULSE TIG-EASY PULSE).

Used on a wide range of materials such as: steel, stainless steel, titanium, copper, nickel, and their alloys.

Key Features
  • Adjustment of parameters during TIG welding: bi-level, start/end...
See full description See full description

  • Welding Current

    220

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.
  • See all
Review the product
Product report

Description

Description

TIG welding machine as well as electrode (MMA) direct current (DC) controlled by a microprocessor.

High-frequency HF or LIFT TIG with pulses (PULSE TIG-EASY PULSE).

Used on a wide range of materials such as: steel, stainless steel, titanium, copper, nickel, and their alloys.

Key Features
  • Adjustment of parameters during TIG welding: bi-level, start/end current intensity, spot time, pre/post gas, etc.
  • Pulse and EASY PULSE function
  • THINSPOT function for quick and precise welding
  • TIG – LIFT: For maximum TIG welding quality
  • VRD: To improve safety during welding operations in wet environments (mines, shipyards, etc.)
  • HOT START: Additional electrical power for smooth welding start.
  • ANTI-STICK: Stops welding current if the electrode sticks to the material.
  • ARC-FORCE: Automatic current calibration during welding for perfect seam.
  • Remote control and water cooler socket (optional)
  • Thermostatic
  • Protection against voltage fluctuations, overload
  • Complete with TIG welding accessories.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
TIG, MMA

Type

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
220 A

Welding Current (max): 220


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
30 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Weight
9700 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
Yes

VRD


It is a voltage reduction device used in welding machines to improve user safety.
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
Yes

Spot Function


Applies a specific amount of current for a very short duration, creating a spot weld.
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

TIG welding machine as well as electrode (MMA) direct current (DC) controlled by a microprocessor.

High-frequency HF or LIFT TIG with pulses (PULSE TIG-EASY PULSE).

Used on a wide range of materials such as: steel, stainless steel, titanium, copper, nickel, and their alloys.

Key Features
  • Adjustment of parameters during TIG welding: bi-level, start/end current intensity, spot time, pre/post gas, etc.
  • Pulse and EASY PULSE function
  • THINSPOT function for quick and precise welding
  • TIG – LIFT: For maximum TIG welding quality
  • VRD: To improve safety during welding operations in wet environments (mines, shipyards, etc.)
  • HOT START: Additional electrical power for smooth welding start.
  • ANTI-STICK: Stops welding current if the electrode sticks to the material.
  • ARC-FORCE: Automatic current calibration during welding for perfect seam.
  • Remote control and water cooler socket (optional)
  • Thermostatic
  • Protection against voltage fluctuations, overload
  • Complete with TIG welding accessories.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
TIG, MMA

Type

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
220 A

Welding Current (max): 220


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
30 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Weight
9700 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
Yes

VRD


It is a voltage reduction device used in welding machines to improve user safety.
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
Yes

2T Operation


Press and hold the torch button to start welding. Once you release it, the welding stops.
4T Mode
Yes

4T Mode


Press the button once to start welding and release it. You do not need to keep the button pressed.
Spot Function
Yes

Spot Function


Applies a specific amount of current for a very short duration, creating a spot weld.
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

1.647,00 €
32,00 €   shipping cost