Skroutz.mt

Milwaukee C18 RAD-0 Angle Drill Driver Battery Solo Brushless 18V
Power Drill Drivers & Screwdrivers

Milwaukee C18 RAD-0 Angle Drill Driver Battery Solo Brushless 18V

Compact angle drill driver (Solo) with the following features:

  • Voltage: 18 V
  • Battery type: Li-ion
  • No-load speed: 0-1500 rpm
  • Chuck size: 10 mm
  • Max drilling capacity in wood: 28 mm
  • Max drilling...

Compact angle drill driver (Solo) with the following features:

  • Voltage: 18 V
  • Battery type: Li-ion
  • No-load speed: 0-1500 rpm
  • Chuck size: 10 mm
  • Max drilling capacity in wood: 28 mm
  • Max drilling capacity in steel: 10 mm
  • Max torque: 20 Nm
  • Weight with battery: 1.9 kg

Additional features:

  • Speed setting: 1500 rpm at 20 Nm.
  • REDLINK PLUS system for tool/battery...
See full description See full description

  • Power Supply

    Battery

    Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.

  • Number of Batteries

    0

    Solo - The package does not include a battery and charger. Please prefer it if you already have a compatible battery from other tools.

  • Voltage

    It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.

  • Maximum Motor Speed

    The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.

  • Chuck Diameter

    The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.

  • Torque Setting

    The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).

  • Brushless

    The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

    1

    It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.
  • See all
152 89 €
Delivery by Thu, 09 Jul
14,00 €   shipping cost
Sent from Greece
From Tripanaki 4.8 (62)
4.8 (62 reviews)
Greece
1 piece
See Power Tools on the page of Tripanaki
Review the product
Product report

Description

Description

Compact angle drill driver (Solo) with the following features:

  • Voltage: 18 V
  • Battery type: Li-ion
  • No-load speed: 0-1500 rpm
  • Chuck size: 10 mm
  • Max drilling capacity in wood: 28 mm
  • Max drilling capacity in steel: 10 mm
  • Max torque: 20 Nm
  • Weight with battery: 1.9 kg

Additional features:

  • Speed setting: 1500 rpm at 20 Nm.
  • REDLINK PLUS™ system for tool/battery overload protection.
  • Automatic 10 mm chuck for maximum flexibility.
  • Compact 100 mm head for working in tight spaces.
  • Multi-position handle for comfort during use.
  • Electronic clutch with 10+1 settings for control during screwing.
  • Built-in battery level indicator and LED lighting.
  • REDLITHIUM-ION™ batteries for double the runtime and increased power.
  • Compatible with all Milwaukee M18™ batteries.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
Yes

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.


It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.

Battery Features

Number of Batteries
0

Number of Batteries: 0


Solo - The package does not include a battery and charger. Please prefer it if you already have a compatible battery from other tools.
Battery Voltage
18 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Compatible Battery Type
Milwaukee M18

Compatible Battery Type

The type of battery that can be installed in the tool.

Drilling Abilities

Steel Ø
10 mm

Steel Ø

The maximum possible drilling diameter in metal. The most common diameter for household screws is 6-8mm.
Wood Ø
28 mm

Features & Functions

Maximum Motor Speed
1500 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
No

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
20 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Maximum Number of Hits
-
Torque Adjustment
Yes

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
No

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
Yes

Angle


Features a head that is positioned at an angle (usually 90 degrees) relative to the body of the tool, thus allowing access to tight or hard-to-reach angles.
Interchangeable Head
No
Reception
Quick Change
Maximum Chuck Diameter
10 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Weight (with Battery)
1900 gr

Extra Features

Carrying Case
Without
Handle Included
No
Integrated Light
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Compact angle drill driver (Solo) with the following features:

  • Voltage: 18 V
  • Battery type: Li-ion
  • No-load speed: 0-1500 rpm
  • Chuck size: 10 mm
  • Max drilling capacity in wood: 28 mm
  • Max drilling capacity in steel: 10 mm
  • Max torque: 20 Nm
  • Weight with battery: 1.9 kg

Additional features:

  • Speed setting: 1500 rpm at 20 Nm.
  • REDLINK PLUS™ system for tool/battery overload protection.
  • Automatic 10 mm chuck for maximum flexibility.
  • Compact 100 mm head for working in tight spaces.
  • Multi-position handle for comfort during use.
  • Electronic clutch with 10+1 settings for control during screwing.
  • Built-in battery level indicator and LED lighting.
  • REDLITHIUM-ION™ batteries for double the runtime and increased power.
  • Compatible with all Milwaukee M18™ batteries.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
Yes

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.


It features a brushless motor that produces less heat and friction, resulting in less wear on the motor and a longer battery life. It also provides more stable power and speed, allowing for smoother and more precise operation. 2. In general, brushless motors are more efficient and have a longer lifespan than motors with brushes, making them a popular choice for electric tools.

Battery Features

Number of Batteries
0

Number of Batteries: 0


Solo - The package does not include a battery and charger. Please prefer it if you already have a compatible battery from other tools.
Battery Voltage
18 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Compatible Battery Type
Milwaukee M18

Compatible Battery Type

The type of battery that can be installed in the tool.

Drilling Abilities

Steel Ø
10 mm

Steel Ø

The maximum possible drilling diameter in metal. The most common diameter for household screws is 6-8mm.
Wood Ø
28 mm

Features & Functions

Maximum Motor Speed
1500 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
No

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
20 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Maximum Number of Hits
-
Torque Adjustment
Yes

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
No

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
Yes

Angle


Features a head that is positioned at an angle (usually 90 degrees) relative to the body of the tool, thus allowing access to tight or hard-to-reach angles.
Interchangeable Head
No
Reception
Quick Change
Maximum Chuck Diameter
10 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Weight (with Battery)
1900 gr

Extra Features

Carrying Case
Without
Handle Included
No
Integrated Light
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

152,89 €
14,00 €   shipping cost