Skroutz.mt

Wilo Hidrainlift 3-35 Single-phase Pump Waste Water / Sewage 0.6hp 4191679
Submersible Water Pumps

Wilo Hidrainlift 3-35 Single-phase Pump Waste Water / Sewage 0.6hp 4191679

Key features:

  • Maximum pump submersion: 7m
  • Maximum temperature: +5°C to 35°C
  • Performance: 54000 Lit/h
  • Power: 400W
See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
  • See all

User Manual

The product is not available at Skroutz Last updated: 5 months ago
Review the product
Product report

Description

Description

Submersible sewage pump from the manufacturer Wilo, used for pumping dirty water that may contain particles. The cutting system it features reduces the size of solid and fibrous materials such as paper, fabrics, plastic, etc., into small particles, which are removed through relatively small diameter pipes. It has a motor with a horsepower of 0.6hp and a power of 400W.

Details

Ready for connection, silent, automatic sewage pumping unit according to EN 12050-2, for underground installation, with all necessary connection and control devices.

Installation components:

  • Reliable submersible pump
  • Integrated check valve
  • Activated carbon filter
  • Overflow protection
  • Flexible connection nozzles

Up to three connections for draining sink, bathtub, shower, bidet, washing machine, or dishwasher.

During installation, local standards and regulations must be observed (e.g., DIN 1986 in Germany).

An optional alarm that requires an electrical network is available.

Specifications

  • Maximum pump submersion: 7m
  • Maximum temperature: +5°C to 35°C
  • Performance: 54000 Lit/h
  • Power: 400W
  • Number of intake ports: 1
  • Mixed tank volume: 16lt
  • Protection rating: IP44
  • Insulation class: F
  • Non-return valve
  • Maximum fluid temperature, for a short time up to 5 minutes: +60°C
  • Dimensions (LxHxW): 511x264x187 mm
  • Weight: 5.37kg


    Permissible Application Field

    • Liquid temperature T: 5 °C
    • Maximum liquid temperature, for a short time up to 5 minutes T: 60 °C
    • Ambient temperature T:5 °C
    • Maximum operating pressure PN:1 bar

    Motor Specifications

    • Electric connection: 1~230 V, 50 Hz
    • Voltage tolerance: ±10 %
    • Nominal power P2: 0.4 kW
    • Nominal speed n: 2900 1/min
    • Nominal current IN: 1.7 A
    • Insulation class: F
    • Motor protection rating: IP44
    • Max. starting frequency t: 100 1/h
    • Net weight approx. m: 5.4 kg

    Materials & Installation Dimensions

    Materials

    • Tank material: PP
    • Pump housing: PP-GF30
    • Impeller: PA66-GF15

    Installation Dimensions

    • Pipe connection on suction side: DN40
    • Pipe connection on discharge side: DN32

    Manufacturer

    Manufacturer Details

    Warnings & Safety Information
    See full description

    Specifications

    Specifications

    Product Guides

    User Manual

    Dimensions

    Type
    Waste Water / Sewage

    Type

    Waste Water / Sewage

    Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
    Power Source
    Electric

    Power Source

    Electric
    The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
    Voltage
    Single-Phase

    Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
    Horsepower
    0.6 hp

    Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
    Power
    450 W

    Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

    Features

    with Cutter Impeller
    Yes

    with Cutter Impeller

    Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
    Float switch
    No

    Float switch

    It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
    Vortex
    No

    Vortex

    The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

    Pumping Specifications

    Maximum Head Height
    -
    Pump Submersion Depth
    7 m
    Maximum Particle Size
    70 mm

    Maximum Particle Size

    Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.

    Materials & Construction

    Set
    No
    Stainless
    No
    Protection Certification
    IP44

    Important information

    Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

    See all specifications

    Description & Specifications

    Submersible sewage pump from the manufacturer Wilo, used for pumping dirty water that may contain particles. The cutting system it features reduces the size of solid and fibrous materials such as paper, fabrics, plastic, etc., into small particles, which are removed through relatively small diameter pipes. It has a motor with a horsepower of 0.6hp and a power of 400W.

    Details

    Ready for connection, silent, automatic sewage pumping unit according to EN 12050-2, for underground installation, with all necessary connection and control devices.

    Installation components:

    • Reliable submersible pump
    • Integrated check valve
    • Activated carbon filter
    • Overflow protection
    • Flexible connection nozzles

    Up to three connections for draining sink, bathtub, shower, bidet, washing machine, or dishwasher.

    During installation, local standards and regulations must be observed (e.g., DIN 1986 in Germany).

    An optional alarm that requires an electrical network is available.

    Specifications

    • Maximum pump submersion: 7m
    • Maximum temperature: +5°C to 35°C
    • Performance: 54000 Lit/h
    • Power: 400W
    • Number of intake ports: 1
    • Mixed tank volume: 16lt
    • Protection rating: IP44
    • Insulation class: F
    • Non-return valve
    • Maximum fluid temperature, for a short time up to 5 minutes: +60°C
    • Dimensions (LxHxW): 511x264x187 mm
    • Weight: 5.37kg


      Permissible Application Field

      • Liquid temperature T: 5 °C
      • Maximum liquid temperature, for a short time up to 5 minutes T: 60 °C
      • Ambient temperature T:5 °C
      • Maximum operating pressure PN:1 bar

      Motor Specifications

      • Electric connection: 1~230 V, 50 Hz
      • Voltage tolerance: ±10 %
      • Nominal power P2: 0.4 kW
      • Nominal speed n: 2900 1/min
      • Nominal current IN: 1.7 A
      • Insulation class: F
      • Motor protection rating: IP44
      • Max. starting frequency t: 100 1/h
      • Net weight approx. m: 5.4 kg

      Materials & Installation Dimensions

      Materials

      • Tank material: PP
      • Pump housing: PP-GF30
      • Impeller: PA66-GF15

      Installation Dimensions

      • Pipe connection on suction side: DN40
      • Pipe connection on discharge side: DN32

      Manufacturer

      Manufacturer Details

      Warnings & Safety Information

      Product Guides

      User Manual

      Dimensions

      Type
      Waste Water / Sewage

      Type

      Waste Water / Sewage

      Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
      Power Source
      Electric

      Power Source

      Electric
      The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
      Voltage
      Single-Phase

      Voltage

      Single-Phase

      Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
      Horsepower
      0.6 hp

      Horsepower

      Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
      Power
      450 W

      Power

      It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

      Features

      with Cutter Impeller
      Yes

      with Cutter Impeller

      Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
      Float switch
      No

      Float switch

      It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
      Vortex
      No

      Vortex

      The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

      Pumping Specifications

      Maximum Head Height
      -
      Pump Submersion Depth
      7 m
      Maximum Particle Size
      70 mm

      Maximum Particle Size

      Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.

      Materials & Construction

      Set
      No
      Stainless
      No
      Protection Certification
      IP44

      Important information

      Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.