I had a semi-branded Chinese Bulle for 40€, which was dead, even though it had the same wattage in the specs. I gave it away as a gift and got this DeWalt. I saw the true light hahaha

After years of struggling with €30 sanders, we finally saw better days! It has no vibrations, it's comfortable, cuts well but is a bit noisy

My husband installed 6 window shutters and 2 balcony doors. Truly a piece of cake for a beginner. It literally made things much easier for him

I have had it for 1 month, I have used it quite a lot and I can say that it is worth the money because it saves you a lot of effort.
Update. I sanded large surfaces for many hours and it did not fail at all, it is totally worth the money, I believe it is not worth paying more for the battery-powered one. It is lightweight and you get used to it in your hand, the dust bag does a good job!

very good tool purchase for sanding cells having at my disposal a 500W AEG orbital sander at double the price I can say that the dewalt is a reliable tool and does its job perfectly in terms of quality!

There are quite a few comments, so I will mention only 2 things. Personally, I find the on-off button inconvenient, but it's a very minor issue. If I had to mention something negative, I think this would be the only thing I could find. Transitioning from more "economical" grinders, the ones you find in well-known supermarkets and some other "budget" brands. The word economical is in many quotes. Judging by the effort saved with this one, I don't know what is actually economical. Also, I have "broken" 3 of the "economical" ones, while this one doesn't seem to have any issues. Personally, I won't buy a "budget" tool again since you end up paying more in the end. I'm not saying someone should go for professional, very expensive lines, but this one is worth it and then some.

The best thing. It doesn't heat up too much, good speed adjustment from the switch. Online warranty extension for free from the mother company. Instead of getting a cheap one for 25-35 euros, it's better to invest a little more and have something that lasts

First eccentric sander I had (so I can't compare it to another one), the tool blows!!! Very high-quality construction with minimal vibrations. I trusted the reviews and bought this one. Very good tool, worth every € ...whether for amateur or professional use and you can easily find sandpaper from various companies!!! I used this one to sand surfaces as well as walls. Also, the dust collection bag does a very good job! The cable length is very good. Also, the eccentric bearing is protected from dust for maximum reliability and durability over time. A big plus is the speed control. I recommend it to anyone who wants it as their first tool.
If you want, watch the video here: https://youtu.be/2_B2AlGNBqI

First eccentric sander I had (so I can't compare it to another), and I find it excellent. It earned its money in 2 weeks where I sanded 3 tables, 2 benches, and about 12 chairs (all garden furniture), it didn't tire me and mainly it didn't bother me with noise. It is very good!

I bought it for professional use, minimal vibrations, satisfactory suction, satisfied for now.

Excellent tool... I didn't expect it, I bought it a week ago to sand 20 square meters of roof tiles, I worked with it for 10 hours a day for 3 days... It didn't make the slightest difference, it didn't heat up at all... I recommend it to anyone who wants it for their first tool...

I bought it and first application, full marble grinding, with 40 grit sandpaper and at speed 6... the black dog didn't make a sound and didn't get excessively hot, nor did it bother me, it worked continuously all morning with some small breaks. The good thing is the accurate material removal if you catch its rhythm. On boards and wood that I used it afterwards, it performed naturally and things were simply... Excellent purchase and in the right hands, it will do a tremendous job.

We have been using it for professional purposes for years and it refuses to break! It works like the first day! A big plus is the speed control dial.

I have eccentric sanders and others from different manufacturers but none like this one. The tool blows!!! Very high-quality construction with minimal vibrations and quite efficient for its category. Also, the bearing of the eccentric is protected from dust for maximum reliability and durability over time.

Very good tool. I usually work with Makita, but I trusted the reviews and bought this one. I can say that it is a very high-quality tool. I recommend it to everyone

Having now 3 shavers, it is my best one. Comfortable, convenient, with speed adjustment, and almost zero vibrations. I highly recommend it.

The latest model is unacceptable!! After 2 months of use, the rubber under the scratch has worn out and it works haphazardly...!!! It's as if it's just a rotating device, resulting in damage!!!

You can try many brands out of the many that exist. I figured it out on the third day, and since I had to work with the tool for 6-8 hours a day for 8 days, the main reason I bought the tool and it made me look good.

So I'm posting a picture of the sanding discs (Smirdex) and these with this specific color, you will get a lot of work done without worrying about the quality of the result and the frequency of changes.

In the scrub, it has them with this name
Smirdex Round Discs 820 P40 150mm 820415040

First, I will start with a positive comment. The device is very good, very powerful. It can withstand many hours of work, I use it almost 2-3 times a week for a few hours. And even without an electric vacuum cleaner, it collects dust very well. But unfortunately, it has a very big downside that no one mentions, after 10-15 minutes, the sandpaper unravels. And even if you buy a new nozzle for sandpaper, it does not hold either. And believe me, if you constantly change the sandpaper every 10-15 minutes, everything is very unpleasant and very expensive. I would never buy it again, I have two devices that I will not advertise, they do not have such a problem.

Very good tool worth every € ... whether for amateur or professional use and you can easily find sandpaper from various companies!!!

I don't have much experience with sanders. I used this one to sand both wooden surfaces and walls. It worked fine. It seems sturdy and powerful, although it struggles sometimes. The length of the cord is very good.
It's a decent machine, but I don't think it justifies the 90-100 euros it costs. That's why I gave it 4 stars. A good price would be around 60-70 euros.

I have been using it continuously for 3 years and it hasn't had the slightest problem. I also bought a second one. It is the best in its category and price. It has a convenient handle and easily connects to a vacuum cleaner. I changed the sanding plate due to wear from frequent use (I found one easily for 15 euros). It uses 12.5 cm diameter sandpaper with 8 holes. Ideal for semi-professional use. Value for money 100%!

For amateur use, it is just what you need! It also has a speed adjustment, so it helps if you want greater accuracy. Also, the dust collection bag it has does a very good job!

3 years of professional use and I am simply changing the pad for sandpaper due to normal wear and tear. Powerful, user-friendly with a long cord and very good dust absorption, frequently emptying the container

For amateur use and for its price, it is very good. Clearly, there are more powerful machines that cost more.

Very powerful and sturdy tool with quality and very good at collecting dust, you can easily work with it without a mask. It does have some difficulty in handling, especially at high speeds, but it seems logical that both the vacuum cleaner and the dust in the atmosphere are minimized. Additionally, another positive is that the sandpaper, due to its rotary motion, does not easily collect dirt, so frequent replacement is not necessary like with palm sanders. If you want, you can also check it out here: https://www.youtube.com/watch?v=olrah6WITtI&t=13s

I had a Krausmann for years and the difference is very significant.
Very good both in material removal and for final finishing.

Lightweight, ergonomic, with minimal vibrations during operation. I have it for amateur use, and so far I have sanded rails very quickly and comfortably.
In addition, it:
- collects a lot of dust in the bag
- has a long cord
- has a speed regulator
- is low in height, which is very convenient during work.

Do not get something cheaper. I use Bosch sandpaper, very powerful and collects a lot of dust in the bag.