Skroutz.mt

PSM 80 A Electric Multi-Sander 80W with Suction System 0603354000
Sanders

PSM 80 A Electric Multi-Sander 80W with Suction System 0603354000

The Bosch PSM 80 A multi-sander has an 80 W motor and a sanding plate divided into two sections, making it suitable for sanding and polishing small surfaces and hard-to-reach areas. The integrated...

The Bosch PSM 80 A multi-sander has an 80 W motor and a sanding plate divided into two sections, making it suitable for sanding and polishing small surfaces and hard-to-reach areas. The integrated microfilter system extracts dust into the microfilter box.

The hook-and-loop fastening system allows for quick replacement of the sanding sheet. The delta tip and...

See full description See full description

Top specs

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Oscillation Range

    Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).

    1.4

    Very fine sanding, sensitive materials, finishing.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • Weight (Net) 900 gr
  • See all
The product is not available for shipping to the selected country.
Product report

Description

Description

The Bosch PSM 80 A multi-sander has an 80 W motor and a sanding plate divided into two sections, making it suitable for sanding and polishing small surfaces and hard-to-reach areas. The integrated microfilter system extracts dust into the microfilter box.

The hook-and-loop fastening system allows for quick replacement of the sanding sheet. The delta tip and sanding plate can be removed and rotated to make better use of the sheet.

  • Type: Multi-sander
  • Power source: Mains-powered
  • Power: 80 W
  • Dust extraction system: Integrated microfilter system
  • Hook-and-loop fastening system: For quick replacement of the sanding sheet
  • Sanding surface: 104 cm²
  • Orbital speed: 22,000 min-1
  • Orbit diameter: 1.4 mm
  • Weight: 900 g
  • Package contents: 3 sanding sheets

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Multi-Sander

Type

Multi-Sander
For smoothing all surfaces with alternating sanding bases.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Oscillation Range
1.4 mm

Oscillation Range: 1.4

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Net Weight
900 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
80 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
No

Speed Setting

Ability to control the rotation speed of the tool.
Turns
13000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
94 dB
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

The Bosch PSM 80 A multi-sander has an 80 W motor and a sanding plate divided into two sections, making it suitable for sanding and polishing small surfaces and hard-to-reach areas. The integrated microfilter system extracts dust into the microfilter box.

The hook-and-loop fastening system allows for quick replacement of the sanding sheet. The delta tip and sanding plate can be removed and rotated to make better use of the sheet.

  • Type: Multi-sander
  • Power source: Mains-powered
  • Power: 80 W
  • Dust extraction system: Integrated microfilter system
  • Hook-and-loop fastening system: For quick replacement of the sanding sheet
  • Sanding surface: 104 cm²
  • Orbital speed: 22,000 min-1
  • Orbit diameter: 1.4 mm
  • Weight: 900 g
  • Package contents: 3 sanding sheets

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Multi-Sander

Type

Multi-Sander
For smoothing all surfaces with alternating sanding bases.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Oscillation Range
1.4 mm

Oscillation Range: 1.4

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


Very fine sanding, sensitive materials, finishing.
Net Weight
900 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
80 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
No

Speed Setting

Ability to control the rotation speed of the tool.
Turns
13000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
94 dB
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
Bosch