The Audac EPA104 PA power amplifier has four channels and uses Class-D technology. It delivers 4 x 100 W at 4 Ω and 4 x 50 W at 8 Ω in stereo mode, while in bridged mode it delivers 2 x 200 W at 8 Ω. It can be used with two independent stereo signals and automatically switches to standby when no audio signal is detected, consuming less than 1 W in this mode.
Protection circuits cover DC faults, short circuits, overheating and overload. It features convection cooling, an XLR input and outputs with 2-pole terminal blocks.
- Type: PA power amplifier
- Channels: 4
- Amplifier technology: Class-D
- Power at 4 Ω: 4 x 100 W per channel in stereo mode
- Power at 8 Ω: 4 x 50 W per channel in stereo mode
- Power in bridged mode: 2 x 200 W at 8 Ω
- Frequency response: 20 Hz - 20 kHz
- Signal-to-noise ratio: > 90 dB
- Input sensitivity: 0 dB (1 V RMS)
- Input impedance: 12 kΩ balanced
- Inputs: XLR
- Outputs: 2-pole terminal block (5.08 mm)
- Cooling system: Convection
- Protection: DC fault, short circuit, overheating, overload and signal limiting
- Standby power consumption: Less than 1 W
- Power consumption: 188 W (1/3 MOP at 1 kHz)
- Power supply: 100-240 V AC, 50/60 Hz
- Operating temperature: 0° - 40° with humidity up to 95%
- Dimensions: 482 x 44 x 330 mm
- Weight: 4.5 kg
Technical Specifications
- Amplifier Type
- PA Amplifier
- Type
- Power Amplifier
- Channels
- 4
- Power (8Ω)
- 50 watt / channel
- Power (4Ω)
- 100 watt / channel
- Class
- D
Additional Specifications
- Radio
- No
- Cooling system
- Yes
Connectivity
- RCA
- No
- XLR
- Yes
- Mini Jack (3.5mm)
- No
- Jack (6.3mm)
- No
- USB
- No
- Ethernet
- No
- Bluetooth
- No
- Mic In
- No
Dimensions
- Width
- 482 mm
- Height
- 44 mm
- Length
- 330 mm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.