Skroutz.mt

Imperia MIG 201 Welding Machine Inverter MIG / MMA / FCAW with Maximum Welding Current 200A and Duty Cycle 16%
Welding Machines

Imperia MIG 201 Welding Machine Inverter MIG / MMA / FCAW with Maximum Welding Current 200A and Duty Cycle 16%

Key features:

  • Type: MIG 201
  • Performance (EN 60974-1): 200 A (16%)
  • Power (MIG/MMA): 8 / 9.4 kVA
  • Adjustment (MIG): 15.5 V - 24 V
  • Wires: ∅ 0.6 - 0.8 - 1.0 mm
  • Weight: 12.8 Kg
See full description

  • Welding Current

    200

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    9.4

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
Product report

Description

Description

Capabilities

Inverter MMA / MIG welding machine from the manufacturer Imperia, where inverter technology enhances the performance and durability of the machine and helps reduce its weight. The MMA electrode method creates thick and strong welds without the need for an external gas supply, making it ideal for welding outside the workshop. The MIG method requires the wire to have a special coating (flux) otherwise it needs to be connected to an external gas cylinder (e.g., argon, CO2). It can operate continuously for 1.6 minutes at 200A before needing to stop to cool down. Therefore, due to the maximum Amps it supports, it melts thicker wires more easily and creates thick welds with fewer passes. Its weight reaches 12.5kg.

Features

  • Type: MIG 201
  • Performance (EN 60974-1): 200 A (16%)
  • Power (MIG/MMA): 8 / 9.4 kVA
  • Adjustment (MIG): 15.5 V - 24 V
  • Wires: ∅ 0.6 - 0.8 - 1.0 mm (coil 5 Kg)
  • Electrode: ∅ 4 mm (max.)
  • Weight: 12.8 Kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MIG, MMA, FCAW

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

FCAW
It uses flux-coated wire, which releases gases as it burns, creating a protective zone around the molten metal.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
16 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
9.4 kVA

Power: 9.4


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Electrode Diameter
4 mm

Maximum Electrode Diameter: 4


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
12500 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
Yes

for Generator with AVR


Suitable for generator with AVR voltage stabilizer.

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • 5
    George_Pol13

    Verified purchase

    • Power
    • Machine durability
    • Construction quality
    • Easy to use
    • Value for money
    • Weight
    • Volume
    • Welding cable length

Description & Specifications

Capabilities

Inverter MMA / MIG welding machine from the manufacturer Imperia, where inverter technology enhances the performance and durability of the machine and helps reduce its weight. The MMA electrode method creates thick and strong welds without the need for an external gas supply, making it ideal for welding outside the workshop. The MIG method requires the wire to have a special coating (flux) otherwise it needs to be connected to an external gas cylinder (e.g., argon, CO2). It can operate continuously for 1.6 minutes at 200A before needing to stop to cool down. Therefore, due to the maximum Amps it supports, it melts thicker wires more easily and creates thick welds with fewer passes. Its weight reaches 12.5kg.

Features

  • Type: MIG 201
  • Performance (EN 60974-1): 200 A (16%)
  • Power (MIG/MMA): 8 / 9.4 kVA
  • Adjustment (MIG): 15.5 V - 24 V
  • Wires: ∅ 0.6 - 0.8 - 1.0 mm (coil 5 Kg)
  • Electrode: ∅ 4 mm (max.)
  • Weight: 12.8 Kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MIG, MMA, FCAW

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

FCAW
It uses flux-coated wire, which releases gases as it burns, creating a protective zone around the molten metal.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
16 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
9.4 kVA

Power: 9.4


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Electrode Diameter
4 mm

Maximum Electrode Diameter: 4


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
12500 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
Yes

for Generator with AVR


Suitable for generator with AVR voltage stabilizer.

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • 5
    George_Pol13

    Verified purchase

    • Power
    • Machine durability
    • Construction quality
    • Easy to use
    • Value for money
    • Weight
    • Volume
    • Welding cable length
552,50 €
38,00 €   shipping cost