Skroutz.mt

Flex BSE 14-3 100 SET Electric burnishing Polisher 1400W 433438
Sanders

Flex BSE 14-3 100 SET Electric burnishing Polisher 1400W 433438

BSE 14-3 100 Set with TRINOXFLEX Satinizer

Specifications

  • Nominal power: 1400 watts
  • Output power: 880 watts
  • Max. tool diameter: 125 mm
  • Tool width: 100 mm
  • Disc connection: 19 mm
  • No-load speed:...

BSE 14-3 100 Set with TRINOXFLEX Satinizer

Specifications

  • Nominal power: 1400 watts
  • Output power: 880 watts
  • Max. tool diameter: 125 mm
  • Tool width: 100 mm
  • Disc connection: 19 mm
  • No-load speed: 1000-3500 rpm
  • Cable length: 4.0 m
  • Weight: 2.9 kg

Basic equipment

  • 1 BS 100 satinizer head (433.462)
  • 1 air bellows (433.896)
  • 1 air pump (256.284)
  • 1 fleece A 280/fine...
See full description See full description

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Soft Start

    Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • Weight (Net) 2900 gr
  • See all
809 99 €
Delivery by Mon, 10 Aug
14,00 €   shipping cost
Sent from Greece
From Mpokias Building Solutions
Greece
2 pieces
See Power Tools on the page of Mpokias Building Solutions
Review the product
Product report

Description

Description

BSE 14-3 100 Set with TRINOXFLEX Satinizer

Specifications

  • Nominal power: 1400 watts
  • Output power: 880 watts
  • Max. tool diameter: 125 mm
  • Tool width: 100 mm
  • Disc connection: 19 mm
  • No-load speed: 1000-3500 rpm
  • Cable length: 4.0 m
  • Weight: 2.9 kg

Basic equipment

  • 1 BS 100 satinizer head (433.462)
  • 1 air bellows (433.896)
  • 1 air pump (256.284)
  • 1 fleece A 280/fine (256.975)
  • 1 polishing ring, S 600 (436.429)
  • 1 polishing ring, S 1500 (436.437)
  • 1 MESHFLEX sanding ring A 400 (434.612)
  • 3 ZIRCOFLEX sanding rings P 80 (3 pcs 434.515)
  • 3 ZIRCOFLEX sanding rings P 120 (3 pcs 434.523)
  • 3 CERAFLEX sanding rings K 120 (3 pcs 434.566)
  • 3 CORUFLEX sanding rings P 180 (3 pcs 434.574)
  • 1 L-BOXX® 238 case (414.093)
  • 1 case insert (433.918)

Description

Satinizer with microprocessor control: speed selection, constant speed control tachogenerator, soft start, restart protection after power interruption, overload protection, and temperature monitoring.

Unique tool attachment with quick-action connector for tool-free changing of system attachments for polishing and sanding with tube belt.

Features a variably adjustable polishing attachment, allows working close to the edge, suitable for narrow cylinders, including edge guide.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
burnishing Polisher

Type

burnishing Polisher

Tribeio for smoothing mainly metallic surfaces with a rotating grinding head.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Net Weight
2900 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
1400 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
4 m

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
No

Speed Setting

Ability to control the rotation speed of the tool.
Turns
3500 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

BSE 14-3 100 Set with TRINOXFLEX Satinizer

Specifications

  • Nominal power: 1400 watts
  • Output power: 880 watts
  • Max. tool diameter: 125 mm
  • Tool width: 100 mm
  • Disc connection: 19 mm
  • No-load speed: 1000-3500 rpm
  • Cable length: 4.0 m
  • Weight: 2.9 kg

Basic equipment

  • 1 BS 100 satinizer head (433.462)
  • 1 air bellows (433.896)
  • 1 air pump (256.284)
  • 1 fleece A 280/fine (256.975)
  • 1 polishing ring, S 600 (436.429)
  • 1 polishing ring, S 1500 (436.437)
  • 1 MESHFLEX sanding ring A 400 (434.612)
  • 3 ZIRCOFLEX sanding rings P 80 (3 pcs 434.515)
  • 3 ZIRCOFLEX sanding rings P 120 (3 pcs 434.523)
  • 3 CERAFLEX sanding rings K 120 (3 pcs 434.566)
  • 3 CORUFLEX sanding rings P 180 (3 pcs 434.574)
  • 1 L-BOXX® 238 case (414.093)
  • 1 case insert (433.918)

Description

Satinizer with microprocessor control: speed selection, constant speed control tachogenerator, soft start, restart protection after power interruption, overload protection, and temperature monitoring.

Unique tool attachment with quick-action connector for tool-free changing of system attachments for polishing and sanding with tube belt.

Features a variably adjustable polishing attachment, allows working close to the edge, suitable for narrow cylinders, including edge guide.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
burnishing Polisher

Type

burnishing Polisher

Tribeio for smoothing mainly metallic surfaces with a rotating grinding head.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Net Weight
2900 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
1400 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
4 m

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
No

Speed Setting

Ability to control the rotation speed of the tool.
Turns
3500 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
Yes

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

809,99 €
14,00 €   shipping cost