The dog doesn't get harmed at all, a couple of times I've found it on the floor in the two years I've had it when I got in the car, you just stick it back on and it's ready. The best in terms of value for money.

Average, good for its price but one of the "pads" that holds the phone came off

Copy of an older Samsung stand. Equally high-quality construction, I stuck it onto the Samsung base, very stable, everything is fine.

I've had it for about 5 years. I go on routes for transport in Kalohori, full of potholes. I've been left speechless by its stability. Get it.

Everything is perfect as long as it is new. After a while, the release button of the device broke, and the suction cup now easily detaches from the windshield. I don't know if it's because I use it in a vehicle that is constantly on dirt roads

Quite a stable base, for 2 months now in a lot of heat it hasn't moved from its position. On uneven roads, it shakes a little, but you get used to it.

It sticks perfectly to the glass, the device does not fit at all. The sides open by themselves with the bumps. What’s the point if the phone can't be held in the base? The 2 stars are for the delivery which was fine.

It is very good, almost the same as a Samsung I had and resembles it. It does its job, the phone doesn't shake when driving. Time will tell how durable it will be.

With good surface cleaning before installation, it is very stable. I am completely satisfied

It is the second time I buy the product. It has a lever on the base of the mobile base that, when you close it, the air comes out of the suction cup and successful suction is ensured! It has never come off!

It is a good copy of the car holder that Samsung used to release for years in a kit with a quick car charger. Obviously, with 8€ you shouldn't expect top quality, but it does its job well and if it lasts through the summer with 60 degrees Celsius inside the car, it has paid off its price.
It holds all phones well, even the S23 Ultra without any problem. The suction cup creaked a little with the high temperatures, to be honest, but not annoyingly.
Don't waste your money on expensive car holders. Use it for car maintenance instead. They are not worth the extra money they ask for.

I have had this specific base for 3 years. It is the only one that has withstood. I have tried several and the most common problem is that the ball on the arm that holds the base would break and the distortion of the suction cup from the sun.

It is the 2nd time I buy it. The first time was for my own car a long time ago. Now I bought it for my girlfriend to be easy to use without complexity. The only negative thing is the sponges on the hooks, maybe they should have used a different material so that it doesn't come off so easily.

Very good base with a very good and stable suction cup. It can be placed in both horizontal and vertical positions without the mobile phone falling off. The only negative thing I would say is that if you need it for recording a route and the mobile phone is placed in a horizontal position, the camera of the phone captures the suction cup and obstructs the view. If you want a base for recording a route and the mobile phone in a horizontal position, prefer a base with an arm.

Very good! I would buy the same again, only I would prefer the depth to be a little deeper to fit the phone along with the protective case. Not that it falls out, but I would feel safer.
My wife, who has a case with a flap (like a wallet), doesn't fit and she has to take it out before using it.

Edit: 1/4/23: It has been 4 years (since the purchase) and it is still stable in its place. It has been exposed to sun, moisture, bumps, etc. and it hasn't noticed anything. The mechanism has loosened a bit, but this doesn't affect the grip at all, just to take out the phone, you have to push one of its wings a little with one finger, almost imperceptible inconvenience.

It is important for stability to have cleaned the glass well, without dust, and to have dried it before putting it on. However, for someone like me who is in a hurry and sometimes changes cars and needs it, even with a little saliva, wiping it with a paper, it sticks perfectly.

I see it and I get annoyed. The first time I assembled it, the screw behind the base broke. It is supposed to prevent the phone from falling off the base and to keep it stable in potholes. Since then, I have been trying to stabilize it somehow, but it keeps falling constantly. It's driving me crazy

Perfect for its price, the phone has never malfunctioned, and it is even more high-quality than I expected from the reviews. It's worth it!

Very good for its price, let's start from there. You don't feel like you're leaving your phone on a shaky game, it's relatively sturdy. Generally, it doesn't fall when I drive, although it has happened to fall a few times, for example, if I don't secure it with saliva on the suction cup (don't make fun at all because your phone will fall and you will cry). Also, if the glass gets too hot, it may fall. Anyway, I use it extensively and I am satisfied. It's great.

Unfortunately, I couldn't support it anywhere and I just threw it away. Plus, every time it fell in the car, it fell with the mobile phone.

The best I have ever tried... Super sturdy construction. Easy detachment from the windshield and very easy system to remove the phone. I ordered it for 2 other friends.

Very good. It holds the Samsung Galaxy S9 Plus with a heavy case. And you can place it however you want, horizontally or vertically. Like!

Very good base for its price, remains stable, does not detach from the windshield, the phone does not move or shake, and most importantly for me as a compulsive type, it has a suction cup because I don't want to stick anything to my car dashboard. The only thing I would add as a negative is that it only sticks to the glass, not the dashboard, and it is not ergonomic (to change the position of the phone, you have to remove it from the glass and unscrew the base to change the position of the phone).

The best. Supports the phone on the windshield, doesn't fall, doesn't move. No need to spend 15+ euros on something else.

Once you place it (in 1-2 minutes), you put your phone and it locks. It remains stable throughout use and then there is a button at the back to release the phone.

The only negative thing I would mention is that when placed on the windshield, it may be a bit far from the driver and therefore one may not easily reach the phone.

It's worth every cent! I would buy it again with my eyes closed!

What impressed me was the speed of delivery. Not even 24 hours passed and I had received it. It is a quality product that I have on my windshield with a suction cup because the plastic is smooth and it doesn't stick. I highly recommend it.

The suction cup sticks well to the glass, but it doesn't stick to the dashboard (at least in my Toyota Aygo).

I give it 4 stars because it sometimes falls, but this is very rare and only happens if it hasn't been properly installed or if there is sunlight or humidity. Other than that, it is a good and affordable car mobile stand.
Update: Recently, it has been causing issues. The mounting mechanism gets stuck and when I press the button, it doesn't release the phone. It started falling more frequently and the suction doesn't hold the entire surface. Finally, one day I tried to remove it without applying much force and it broke. Maybe it's because the construction is not very sturdy.

It will easily fit even the largest mobile phone, in terms of screen size, thickness, and weight. It sticks very well and does not come off in potholes. The phone doesn't fall even if it's horizontal. And if the charging port is in the middle of the phone, you can charge it on the stand. It's easy to adjust the position of the phone. It's worth its money and more.