Stanley STHT77065-0 with Maximum Distance Measurement up to 20m
Accuracy: (±)3mm, Certification: IP40
from50,60 € at 7 stores
Dewalt DWHT77100 with Measurement Capability up to 30m
Accuracy: (±)3mm, Certification: IP40, Wavelength: 690 nm
from51,93 € at 16 stores- Top User Rated
Top User RatedNoyafa NF-271 with Measurement Capacity up to 70m
Accuracy: (±)2mm, Certification: IP40
from28,90 € at 22 stores 
Stanley STHT77100-0 With Measurement Capability Up To 30m
Accuracy: (±)3mm, Certification: IP40
from54,99 € at 9 stores
Stanley FLM165 With Measurement Capability Up To 50m
Accuracy: (±)1.5mm, Certification: IP40
from101,00 € at 8 stores
Metabo LD 60 with Measurement Capacity up to 60m
Accuracy: (±)1.5mm, Certification: IP40, Wavelength: 635 nm
from175,00 € at 2 storesStanley TLM65 with Measurement Capacity up to 20m
Accuracy: (±)3mm, Certification: IP40
from57,10 € at 3 stores
Filters
- Amateur / DIY: For home use, decoration, simple space measurements (with measurement accuracy over ±2.0 mm).
- Semi-professional: Satisfactory accuracy for project or workshop measurements (with measurement accuracy from ± 1.6 mm to ± 2.0 mm).
- Professional / Precision: Suitable for engineers, construction, surveying (with measurement accuracy up to ± 1.5 mm).
- Volume: It is used to calculate the volume of a space (e.g. room, warehouse, office)
- Surface: It is used to calculate the area (m²) of a flat surface, such as a wall, floor, ceiling, or window.
- Triangle: It is used to calculate areas or distances that form a triangle, not necessarily a right triangle.
- Pythagorean: Allows you to calculate a length (usually height or distance) that cannot be measured directly with the laser, by measuring two or three other distances that form a right triangle.
- Measurement accuracy indicates how close the laser's result is to the actual distance.
- Red: It is suitable for indoor work and short distances (wavelength: approximately 630 – 680 nm).
- Green: Offers excellent visibility, especially outdoors and over long distances (wavelength: approximately 515 – 550 nm).
- IP40: Protection against large dust particles, no resistance to water; suitable only for indoor, clean environments.
- IP54: Protection against dust and water spray from any direction; the most common rating for professional lasers for indoor and outdoor use.
- IP65: Complete protection against dust and low-pressure water jets; excellent for frequent outdoor use.
Be the first to leave a comment!