Skroutz.mt

Telwin Infinity 150 Inverter MMA / TIG Welding Machine with Maximum Welding Current of 130A and 7% Duty Cycle
Welding Machines

Telwin Infinity 150 Inverter MMA / TIG Welding Machine with Maximum Welding Current of 130A and 7% Duty Cycle

INFINITY 150 INVERTER Electrode MMA-TIG

  • Type: Infinity 150
  • Performance: 130A
  • Voltage: 230V
  • Max Electrode: 3.2mm
  • Safety Lock: 16 A single-phase
  • Efficiency: 82%
  • Max no-load voltage: 72V
  • Max current:...

INFINITY 150 INVERTER Electrode MMA-TIG

  • Type: Infinity 150
  • Performance: 130A
  • Voltage: 230V
  • Max Electrode: 3.2mm
  • Safety Lock: 16 A single-phase
  • Efficiency: 82%
  • Max no-load voltage: 72V
  • Max current: 125 A - 7%
  • Capacitive electrodes dc: 1.6 - 3.2 mm %
  • Main frequency: 50/60 Hz
  • Power factor (cosphi): 0.6
  • Protection degree: IP21
  • Body + clamp: 2+2 m
  • Dimensions:...
See full description See full description

Top specs

  • Welding Current

    130

    Suitable for use in medium-thickness metal constructions and pipelines.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.
  • See all

User Manual

Welding current (max)

  1. 130 A

    from 214,00 €

  2. 150 A

    from 288,00 €

  3. 200 A

    from 463,79 €

214 00 €
Delivery Mon, 02 Nov - Wed, 04 Nov
14,00 €   shipping cost
Sent from Greece
From Emkate 4.9 (16)
4.9 (16 reviews)
Greece
9 pieces
See Tools on the page of Emkate

Learn more about invoicing
Product report

Description

Description

INFINITY 150 INVERTER Electrode MMA-TIG

  • Type: Infinity 150
  • Performance: 130A
  • Voltage: 230V
  • Max Electrode: 3.2mm
  • Safety Lock: 16 A single-phase
  • Efficiency: 82%
  • Max no-load voltage: 72V
  • Max current: 125 A - 7%
  • Capacitive electrodes dc: 1.6 - 3.2 mm %
  • Main frequency: 50/60 Hz
  • Power factor (cosphi): 0.6
  • Protection degree: IP21
  • Body + clamp: 2+2 m
  • Dimensions: 32cm x 37cm x 4.5cm
  • Weight: 3.54 kg

Description:

  • ENERGY EFFICIENT - low power consumption.
  • HOT START IGNITION - Additional electric power for smooth welding start.
  • ANTI-STICK - Stops welding current if the electrode sticks to the material.
  • Welding suitable for use with a generator (±15%).
  • ARC-FORCE - Automatic current calibration during welding for a perfect seam.
  • Compact and lightweight.
  • High welding current stability despite network voltage fluctuations.
  • Arc force, hot start, and anti-stick devices.
  • Thermostatic, overvoltage, undervoltage, overcurrent, motor protection (± 15%).
  • Complete with MMA welding accessories and cardboard carrying case.
  • Made in Italy.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Dimensions

Type
MMA, TIG

Type

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Welding Current (max)
130 A

Welding Current (max): 130


Suitable for use in medium-thickness metal constructions and pipelines.
Operation Cycle (max Ampere)
7 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Maximum Electrode Diameter
3.2 mm

Maximum Electrode Diameter: 3.2


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Weight
3540 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (12)

Reviews

5.0
12
5.0
Review this product
  1. 10
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
  • Power
  • Machine durability
  • Construction quality
  • Weight
  • Volume
  • Easy to use
  • Value for money
  • Welding cable length
  • Babis_Anastasioy
    5
    3 out of 4 members found this review helpful
    Babis_Anastasioy
    This review is about the welding current (max): 150 A

    Really good machine. I stuck with a 2.5 electrode and I was completely satisfied at 80A. I compared it to another electronic one I have and I can say that the machine is much more powerful. Its cables are close, but I don't think that's a problem. I also have alternatives from the other welding machine that fit and are far away. After all, these work with continuous current so we don't need excessively long cables, since continuous current doesn't go far. I recommend this welding machine.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • Avtwvhs_GR
    5
    4 out of 4 members found this review helpful
    Avtwvhs_GR
    This review is about the welding current (max): 150 A

    I bought it for amateur use, on sale for 169 euros from Leroy Merlin, replacing an old classic 150 kg (not Amper) electric welding machine... In the very first job, on a garage door, I encountered the issue that I had already read about regarding the short cables. They are really VERY short... However, that was the only negative aspect! And it can be easily fixed! My welds were truly PROFESSIONAL! Without being an expert. While with the old welding machine, it seemed like the work was not done by a professional. Very easy to use, very easy to transport, I don't know its capabilities on a professional level, but for anyone who is an amateur like me, it is an excellent choice.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • kaleonidas
    5
    1 out of 2 members found this review helpful
    kaleonidas
    This review is about the welding current (max): 150 A

    The welding is quite good even though it is my first one, but it is very easy to use and makes strong welds. I have been working with it for a while without it getting hot. The cable length is short but someone can change them

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • georginaki.91
    5
    1 out of 1 members found this review helpful
    georginaki.91
    This review is about the welding current (max): 150 A

    It is a very good and reliable machine, with the only drawback being its small cable, which of course you can replace with another one, so it's a minor issue. The length of the cable is simply satisfactory. It is a quiet machine with a lightweight but sturdy construction. I am completely satisfied with this purchase, after extensive market research. I highly recommend it.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • ydrotexnikh
    4
    7 out of 7 members found this review helpful
    ydrotexnikh
    Store representative
    This review is about the welding current (max): 150 A

    It is a very reliable and powerful machine. I used it with a 3.2mm electrode and it didn't notice a thing. I didn't use it with a smaller electrode that obviously would throw it off. Four stars only for its short cables (about 1.80 to 2 meters), otherwise it didn't let me wait for it to cool down after hours of operation, working only with three-point electrodes. I highly recommend it.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • 1
    1 out of 1 members found this review helpful
    Babis_Doudesis
    This review is about the welding current (max): 150 A

    Unacceptable, I wonder about the so many good reviews.....

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    emmanios

    Verified purchase

    This review is about the welding current (max): 150 A

    excellent choice. highly recommended

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    vitalios_todikidis

    Verified purchase

    This review is about the welding current (max): 150 A

  • 5
    Stamatis_Andreou6336

    Verified purchase

    This review is about the welding current (max): 200 A

  • 5
    GALAXYS4

    Verified purchase

    This review is about the welding current (max): 150 A

    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Welding cable length
    • Value for money
  • 5
    Chris_Xionidis
    This review is about the welding current (max): 150 A

    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Welding cable length
    • Value for money
  • 5
    grafanakisdim

    Verified purchase

    This review is about the welding current (max): 150 A

    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
  • Babis_Anastasioy
    5
    Babis_Anastasioy

    Really good machine. I stuck with a 2.5 electrode and I was completely satisfied at 80A. I compared it to another electronic one I have and I can say that the machine is much more powerful. Its cables are close, but I don't think that's a problem. I also have alternatives from the other welding machine that fit and are far away. After all, these work with continuous current so we don't need excessively long cables, since continuous current doesn't go far. I recommend this welding machine.

    Translated from Greek ·
    3
  • Avtwvhs_GR
    5
    Avtwvhs_GR

    I bought it for amateur use, on sale for 169 euros from Leroy Merlin, replacing an old classic 150 kg (not Amper) electric welding machine... In the very first job, on a garage door, I encountered the issue that I had already read about regarding the short cables. They are really VERY short... However, that was the only negative aspect! And it can be easily fixed! My welds were truly PROFESSIONAL! Without being an expert. While with the old welding machine, it seemed like the work was not done by a professional. Very easy to use, very easy to transport, I don't know its capabilities on a professional level, but for anyone who is an amateur like me, it is an excellent choice.

    Translated from Greek ·
    4
  • kaleonidas
    5
    kaleonidas

    The welding is quite good even though it is my first one, but it is very easy to use and makes strong welds. I have been working with it for a while without it getting hot. The cable length is short but someone can change them

    Translated from Greek ·
    1
  • georginaki.91
    5
    georginaki.91

    It is a very good and reliable machine, with the only drawback being its small cable, which of course you can replace with another one, so it's a minor issue. The length of the cable is simply satisfactory. It is a quiet machine with a lightweight but sturdy construction. I am completely satisfied with this purchase, after extensive market research. I highly recommend it.

    Translated from Greek ·
    1
  • ydrotexnikh
    4
    ydrotexnikh

    It is a very reliable and powerful machine. I used it with a 3.2mm electrode and it didn't notice a thing. I didn't use it with a smaller electrode that obviously would throw it off. Four stars only for its short cables (about 1.80 to 2 meters), otherwise it didn't let me wait for it to cool down after hours of operation, working only with three-point electrodes. I highly recommend it.

    Translated from Greek ·
    7
  • See all

Description & Specifications

INFINITY 150 INVERTER Electrode MMA-TIG

  • Type: Infinity 150
  • Performance: 130A
  • Voltage: 230V
  • Max Electrode: 3.2mm
  • Safety Lock: 16 A single-phase
  • Efficiency: 82%
  • Max no-load voltage: 72V
  • Max current: 125 A - 7%
  • Capacitive electrodes dc: 1.6 - 3.2 mm %
  • Main frequency: 50/60 Hz
  • Power factor (cosphi): 0.6
  • Protection degree: IP21
  • Body + clamp: 2+2 m
  • Dimensions: 32cm x 37cm x 4.5cm
  • Weight: 3.54 kg

Description:

  • ENERGY EFFICIENT - low power consumption.
  • HOT START IGNITION - Additional electric power for smooth welding start.
  • ANTI-STICK - Stops welding current if the electrode sticks to the material.
  • Welding suitable for use with a generator (±15%).
  • ARC-FORCE - Automatic current calibration during welding for a perfect seam.
  • Compact and lightweight.
  • High welding current stability despite network voltage fluctuations.
  • Arc force, hot start, and anti-stick devices.
  • Thermostatic, overvoltage, undervoltage, overcurrent, motor protection (± 15%).
  • Complete with MMA welding accessories and cardboard carrying case.
  • Made in Italy.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Dimensions

Type
MMA, TIG

Type

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".
Welding Current (max)
130 A

Welding Current (max): 130


Suitable for use in medium-thickness metal constructions and pipelines.
Operation Cycle (max Ampere)
7 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Maximum Electrode Diameter
3.2 mm

Maximum Electrode Diameter: 3.2


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Weight
3540 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (12)

5.0
12
5.0
Review this product
  1. 10
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
  • Power
  • Machine durability
  • Construction quality
  • Weight
  • Volume
  • Easy to use
  • Value for money
  • Welding cable length
  • Babis_Anastasioy
    5
    3 out of 4 members found this review helpful
    Babis_Anastasioy
    This review is about the welding current (max): 150 A

    Really good machine. I stuck with a 2.5 electrode and I was completely satisfied at 80A. I compared it to another electronic one I have and I can say that the machine is much more powerful. Its cables are close, but I don't think that's a problem. I also have alternatives from the other welding machine that fit and are far away. After all, these work with continuous current so we don't need excessively long cables, since continuous current doesn't go far. I recommend this welding machine.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • Avtwvhs_GR
    5
    4 out of 4 members found this review helpful
    Avtwvhs_GR
    This review is about the welding current (max): 150 A

    I bought it for amateur use, on sale for 169 euros from Leroy Merlin, replacing an old classic 150 kg (not Amper) electric welding machine... In the very first job, on a garage door, I encountered the issue that I had already read about regarding the short cables. They are really VERY short... However, that was the only negative aspect! And it can be easily fixed! My welds were truly PROFESSIONAL! Without being an expert. While with the old welding machine, it seemed like the work was not done by a professional. Very easy to use, very easy to transport, I don't know its capabilities on a professional level, but for anyone who is an amateur like me, it is an excellent choice.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • kaleonidas
    5
    1 out of 2 members found this review helpful
    kaleonidas
    This review is about the welding current (max): 150 A

    The welding is quite good even though it is my first one, but it is very easy to use and makes strong welds. I have been working with it for a while without it getting hot. The cable length is short but someone can change them

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • georginaki.91
    5
    1 out of 1 members found this review helpful
    georginaki.91
    This review is about the welding current (max): 150 A

    It is a very good and reliable machine, with the only drawback being its small cable, which of course you can replace with another one, so it's a minor issue. The length of the cable is simply satisfactory. It is a quiet machine with a lightweight but sturdy construction. I am completely satisfied with this purchase, after extensive market research. I highly recommend it.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • ydrotexnikh
    4
    7 out of 7 members found this review helpful
    ydrotexnikh
    Store representative
    This review is about the welding current (max): 150 A

    It is a very reliable and powerful machine. I used it with a 3.2mm electrode and it didn't notice a thing. I didn't use it with a smaller electrode that obviously would throw it off. Four stars only for its short cables (about 1.80 to 2 meters), otherwise it didn't let me wait for it to cool down after hours of operation, working only with three-point electrodes. I highly recommend it.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • 1
    1 out of 1 members found this review helpful
    Babis_Doudesis
    This review is about the welding current (max): 150 A

    Unacceptable, I wonder about the so many good reviews.....

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    emmanios

    Verified purchase

    This review is about the welding current (max): 150 A

    excellent choice. highly recommended

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    vitalios_todikidis

    Verified purchase

    This review is about the welding current (max): 150 A

  • 5
    Stamatis_Andreou6336

    Verified purchase

    This review is about the welding current (max): 200 A

  • 5
    GALAXYS4

    Verified purchase

    This review is about the welding current (max): 150 A

    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Welding cable length
    • Value for money
  • 5
    Chris_Xionidis
    This review is about the welding current (max): 150 A

    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Welding cable length
    • Value for money
  • 5
    grafanakisdim

    Verified purchase

    This review is about the welding current (max): 150 A

    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
  • Babis_Anastasioy
    5
    Babis_Anastasioy

    Really good machine. I stuck with a 2.5 electrode and I was completely satisfied at 80A. I compared it to another electronic one I have and I can say that the machine is much more powerful. Its cables are close, but I don't think that's a problem. I also have alternatives from the other welding machine that fit and are far away. After all, these work with continuous current so we don't need excessively long cables, since continuous current doesn't go far. I recommend this welding machine.

    Translated from Greek ·
    3
  • Avtwvhs_GR
    5
    Avtwvhs_GR

    I bought it for amateur use, on sale for 169 euros from Leroy Merlin, replacing an old classic 150 kg (not Amper) electric welding machine... In the very first job, on a garage door, I encountered the issue that I had already read about regarding the short cables. They are really VERY short... However, that was the only negative aspect! And it can be easily fixed! My welds were truly PROFESSIONAL! Without being an expert. While with the old welding machine, it seemed like the work was not done by a professional. Very easy to use, very easy to transport, I don't know its capabilities on a professional level, but for anyone who is an amateur like me, it is an excellent choice.

    Translated from Greek ·
    4
  • kaleonidas
    5
    kaleonidas

    The welding is quite good even though it is my first one, but it is very easy to use and makes strong welds. I have been working with it for a while without it getting hot. The cable length is short but someone can change them

    Translated from Greek ·
    1
  • georginaki.91
    5
    georginaki.91

    It is a very good and reliable machine, with the only drawback being its small cable, which of course you can replace with another one, so it's a minor issue. The length of the cable is simply satisfactory. It is a quiet machine with a lightweight but sturdy construction. I am completely satisfied with this purchase, after extensive market research. I highly recommend it.

    Translated from Greek ·
    1
  • ydrotexnikh
    4
    ydrotexnikh

    It is a very reliable and powerful machine. I used it with a 3.2mm electrode and it didn't notice a thing. I didn't use it with a smaller electrode that obviously would throw it off. Four stars only for its short cables (about 1.80 to 2 meters), otherwise it didn't let me wait for it to cool down after hours of operation, working only with three-point electrodes. I highly recommend it.

    Translated from Greek ·
    7
  • See all
214,00 €
14,00 €   shipping cost