Update: I am providing as an image the benchmarks that the pibenchmarks.com script gave me (you can find the script on their website). The benchmarks on the website: https://pibenchmarks.com/benchmark/47595
Disclaimer: This review is for a very specific use. I say this because it may not interest most people, but when I was looking for a hard drive for the following use, such a review would have helped me avoid buying hard drives that didn't work in the end.
tl:dr An excellent SSD to connect to a Raspberry Pi 4. Combine it with a Sata to Usb enclosure and simply connect it to the Raspberry Pi (after flashing an operating system on it).
For a while now, I have been looking for an SSD so that I can boot from USB on my Raspberry Pi 4.
Other external SSDs that I had tried (such as the https://www.skroutz.gr/s/12526836/Intenso-Premium-Edition-256GB-%CE%91%CE%BD%CE%B8%CF%81%CE%B1%CE%BA%CE%AF.html) didn't do the job for me and had problems with booting. The solution for some of them involved connecting it to a Linux operating system so that it could open its file system and change some files (which are not visible from Windows, for example, which I have).
I read that many people on the Raspberry Pi forum use this specific drive to do exactly what I was looking for, so I tried it.
Absolutely satisfied. Out of the box, plug and play. It worked perfectly on the Raspberry Pi 4 with Raspbian OS, and the system boots in less than 10 seconds from the moment you power it on. (It might be even less, but in ~10 seconds, I can SSH into it from my computer as I run it headless).
In comparison, the speeds (sequential) with other storage devices I have tried on the Raspberry Pi are:
Kingston SD Card (I don't remember the model, it doesn't matter, it was terrible): 23mb/s Read, 10 mb/s Write
Kingston DataTraveler G4 32GB USB 3.0: ~50mb/s Read, ~20 mb/s Write
And the SSD: ~300mb/s read and ~180mb/s write.
Its speed (via the rpi's usb3.0) simply outperformed all the others.
I recommend combining it with the also ABSOLUTELY compatible enclosure for SATA to USB 3.0: https://www.skroutz.gr/s/24482961/Ugreen-External-Hard-Drive-Enclosure-with-UASP.html
I got the UASP version because the Rpi4 supports UASP and it further increases the speeds. If you want more info on UASP related to the Rpi4, check here: https://www.youtube.com/watch?v=t0kYcM1E5fY
A cheap solution for a cheap Raspberry Pi that simply boosts its speed.
Update: Παραθέτω σαν εικόνα τα benchmarks που μου έβγαλε το pibenchmarks.com script (μπορείτε να το βρείτε το script στην σελίδα τους). Τα benchmarks στην ιστοσελίδα: https://pibenchmarks.com/benchmark/47595
Disclaimer: Το review είναι για πολύ συγκεκριμένη χρήση. Το λέω γιατί μπορεί να μην ενδιαφέρει τους περισσότερους, αλλά όταν έψαχνα σκληρό για την παρακάτω χρήση, θα με βοηθούσε ένα τέτοιο review για να μην είχα αγοράσει σκληρούς που τελικά δεν δούλευαν.
tl:dr Ένας εξαιρετικός SSD για να τον συνδέσετε με ένα Raspberry Pi 4. Συνδιάστε το με ένα Sata to Usb enclosure και απλά συνδέστε το στο raspberry (αφού κάνετε flash ένα λειτουργικό επάνω).
Καιρό τώρα έψαχνα έναν SSD ώστε να μπορέσω να κάνω boot από USB σε Paspberry Pi 4.
Άλλοι εξωτερικοί SSD που είχα δοκιμάσει (πχ τον https://www.skroutz.gr/s/12526836/Intenso-Premium-Edition-256GB-%CE%91%CE%BD%CE%B8%CF%81%CE%B1%CE%BA%CE%AF.html) δεν μου έκανε την δουλειά και παρουσίαζε προβλήματα στο boot. Η λύση μερικών από αυτών, περιλάμβανε να τον συνδέσεις σε Linux λειτουργικό ώστε να μπορεί να ανοίξει το file system του και να αλλάξεις κάποια αρχεία (που δεν φαίνονται από windows πχ που έχω).
Τον συγκεκριμένο δίσκο διάβασα πως χρησιμοποιούν αρκετοί στο raspberry pi forum για να κάνουν αυτό ακριβώς που έψαχνα και έτσι τον δοκίμασα.
ΑΠΟΛΥΤΩΣ ευχαριστημένος. Out of the box, plug and play. Έπαιξε όλο το rpi4 με Raspbian OS επάνω και το σύστημα bootάρει σε λιγότερο από 10 secs από τη στιγμή που του δίνεις ρεύμα. (Μπορεί και λιγότερο, απλά σε ~10 secs μπορώ να κάνω SSH από τον υπολογιστή μου καθώς το τρέχω headless).
Συγκριτικά οι ταχύτητες (sequential) με άλλα storage που έχω δοκιμάσει επάνω στο raspberry:
Kingston SD Card (δε θυμάμαι μοντέλο, δεν έχει σημασία, ήταν τραγικά): 23mb/s Read, 10 mb/s Write
Kingston DataTraveler G4 32GB USB 3.0: ~50mb/s Read, ~20 mb/s Write
Και του SSD: ~300mb/s read και ~180mb/s write.
Η ταχύτητά του (μέσω usb3.0 του rpi) απλά διέλυσε όλους τους υπόλοιπους.
Προτείνω να το συνδιάσετε με την επίσης ΑΠΟΛΥΤΩΣ compatible enclosure για SATA σε USB 3.0: https://www.skroutz.gr/s/24482961/Ugreen-External-Hard-Drive-Enclosure-with-UASP.html
Πήρα το UASP version για τον λόγo του ότι το Rpi4 υποστηρίζει UASP και αυξάνει τις ταχύτητες ακόμα παραπέρα. Αν θέλετε παραπάνω info στο UASP σχετικά με το Rpi4 δείτε εδώ: https://www.youtube.com/watch?v=t0kYcM1E5fY
Μια φθηνή λύση για έναν φθηνό Raspberry Pi που απλά απογειώνει την ταχύτητά του.