PrimaCreator EasyPrint PLA 3D printing filament is made from 100% pure PLA pellets and has a slightly softer, more flexible composition than standard PLA. Suitable for FFF/FDM printers, including models with a Bowden extruder, it prints at an extruder temperature of 185–220 °C and has low shrinkage, reducing the risk of warping. Printing is also possible without a heated bed, while a temperature of 40–60 °C improves layer adhesion.
The uniform diameter with a tolerance of ±0.02 mm and the carefully wound spool help ensure smooth feeding and reduce the risk of tangling during long prints. The spool features a filament length indicator, and the product is vacuum-packed with a desiccant. It adheres well to Buildtak and to glass surfaces when used with glue or spray.
- Material: PLA, 100% pure pellets
- Color: White
- Filament diameter: 1.75 mm
- Diameter tolerance: ±0.02 mm
- Filament weight: 0.5 kg
- Filament length: 170 m ±1%
- Extruder temperature: 185–220 °C
- Bed temperature: 0–60 °C
- Heated bed: Not required
- Print speed: 25–100 mm/s
- Density: 1.25 g/cm³
- Melting temperature: 175–179 °C
- Glass transition temperature: 60–62 °C
- Tensile yield strength: 63 MPa
- Elongation at break: 6%
- Flexural strength: 92 MPa
- Izod impact strength: 3.5 KJ/m²
- Packaging: Vacuum-packed spool with desiccant
- Filament length indicator: Available
- Pieces: 1
- Product Number
- PC-EPLA-175-0500-WH
- Material
- PLA
- Colour
- White
- Diameter
- 1.75 mm
- Weight
- 0.5 kg
- Filament Packaging
- Spool
- Quantity
- 1 pcs
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.