The translucent water-based acrylic primer Vivechrom Vive Primer prepares masonry before the application of plastic and acrylic paints. It penetrates and binds the substrate, making it easier to spread the topcoat and helping create a uniform surface.
Suitable for plaster, cement and skim-coated surfaces, indoors and outdoors. The surface must be clean, dry and free from dust, oils, salts and loose material. Dilute with clean water at a ratio of 1:3–4 and apply one coat using a roller, brush or airless spray gun. Clean tools immediately with water and detergent.
- Type: Primer
- Composition: 100% acrylic
- Base: Water-based
- Appearance: Translucent
- Suitable surfaces: Masonry, plaster, cement and skim-coated surfaces
- Application area: Interior and exterior
- Surface preparation: Clean, dry and free from dust, oils, salts and loose material
- Dilution: 1 part primer to 3–4 parts clean water
- Application: 1 coat using a roller, brush or airless spray gun
- Coverage: 15–20 m²/l per coat, depending on dilution and surface absorbency
- Touch dry: Less than 1 hour
- Recoat: After 2–3 hours
- Application temperature: 10–35°C
- Volatile organic compounds: Up to 5 g/l (EU limit: 30 g/l)
- Volume: 3 l
- Product Number
- 5175121
Specifications
- Genre
- Primer
- Surface Material
- Masonry
- Surfaces
- Multiprimer
- Properties
- Acrylic, Water
Quantity
- Mass Gaining
- 3 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.