Vivechrom Vive Primer prepares masonry before the application of emulsion and acrylic paints. Its water-based acrylic formula is semi-transparent and penetrates the substrate, helping the topcoat spread easily and create an even finish.
Suitable for plaster, cement and skim-coated surfaces, indoors and outdoors. Dilute with 3–4 parts clean water to 1 part primer and apply one coat using a roller, brush or airless spray gun. The surface must be clean, dry and free of dust, oils, salts and loose material. Apply and allow to dry at temperatures of 10–35 °C. It is touch-dry in less than 1 hour and can be recoated after 2–3 hours. Clean tools immediately with water and detergent.
- Type: Primer
- Composition: 100% acrylic, water-based
- Appearance: Semi-transparent
- Suitable surfaces: Plaster, cement and skim-coated surfaces
- Use: Interior and exterior
- Suitable for: Masonry
- Substrate preparation: Clean, dry and free of dust, oils, salts and loose material
- Dilution: 1 part primer to 3–4 parts clean water
- Application: Roller, brush or airless spray gun
- Coats: 1
- Coverage: 15–20 m²/l per coat, depending on dilution and absorbency
- Touch-dry: Less than 1 hour
- Recoating: After 2–3 hours
- Application and drying temperature: 10–35 °C
- Volatile organic compounds: Up to 5 g/l (EU limit: 30 g/l)
- Volume: 0.75 l
- Product Number
- 5175120
Specifications
- Genre
- Primer
- Surface Material
- Masonry
- Surfaces
- Multiprimer
- Properties
- Acrylic, Water
Quantity
- Mass Gaining
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.