GENERAL CHARACTERISTICS
White water-based primer with acrylic resins, suitable for exterior and interior use. Increases coverage while reducing the necessary coats of the final paint, achieving the ideal balance of absorption and light scattering.
- Applies easily, dries quickly.
- Suitable for all water-based paints.
- Improves the appearance and durability of the final paint.
SHADES
Available in white and tintable in 3 shades: Yellow, Red, and Gray through the Vitex Color System.
PREPARATION
Surfaces must be clean, dry, and smooth. Acrylic Building Putty is used for filling. New surfaces are sanded with sandpaper and primed with Vitex's PreColor Primer.
APPLICATION
Stir well before use. Apply in one coat with a roller or brush without dilution. The product is dry to the touch in 30-60 minutes and can be recoated after 3-4 hours.
TECHNICAL CHARACTERISTICS
- Viscosity: 95 ± 5 KU (ASTM D 562, 25o C)
- Density: 1.21 ± 0.02 Kg / L (ISO 2811)
STORAGE
Containers should be kept closed in a shaded place at temperatures between 5oC - 38oC.
SAFETY INSTRUCTIONS
Read the label before use.
Surface drying time 30-60 min
Coverage 10-12 m2/L
Specifications
- Genre
- Primer
- Surface Material
- Masonry
- Surfaces
- Multiprimer
- Properties
- Acrylic, Water
Quantity
- Mass Gaining
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.