Vitex PreColor Primer is a white, water-based acrylic masonry primer suitable for interior and exterior use. It increases coverage and improves the appearance, adhesion and durability of the finish coat, helping reduce the number of coats required. It is suitable as a primer for water-based paints and can be tinted using the Vitex Tinting System.
Apply one coat with a roller or brush without thinning, or with an airless spray gun after thinning with 5–10% water. Touch-dry in 30–60 minutes and ready for recoating after 3–4 hours with Vitex emulsion or acrylic paints. Drying times may vary depending on temperature and relative humidity.
- Type: Primer
- Material: Acrylic resins
- Base: Water-based
- Application surface: Masonry
- Use: Interior and exterior
- Colour: White
- Tinting: Using the Vitex Tinting System, for final shades from clear, medium and white bases
- Volume: 10 L
- Coverage: 10–12 m²/L
- Application: One coat with a roller or brush without thinning, or with an airless spray gun after thinning with 5–10% water
- Touch-dry: 30–60 minutes
- Recoating: After 3–4 hours
- Application temperature: From 5 °C to 35 °C
- Maximum relative humidity for application: 80%
- Viscosity: 95 ± 5 KU (ASTM D 562, 25 °C)
- Density: 1.21 ± 0.02 kg/L (ISO 2811)
- Storage: In a sealed container, in a shaded place away from direct sunlight, at a temperature of 5–38 °C
- Tool cleaning: Immediately after use with water and, if necessary, soap or detergent
Specifications
- Genre
- Primer
- Surface Material
- Masonry
- Surfaces
- Multiprimer
- Properties
- Acrylic, Water
Quantity
- Mass Gaining
- 10 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.