Skroutz.mt

Azurefilm PLA 3D Printer Filament 1.75mm Baby Blue Pastel 1kg
3D Printer Filament

Azurefilm PLA 3D Printer Filament 1.75mm Baby Blue Pastel 1kg Code: FPL-OA0017

The Azurefilm offers a 3D filament that combines excellent quality and vibrant color. This filament has the following characteristic details:

  • The color is a sweet Blue, adding a pleasant touch to...

The Azurefilm offers a 3D filament that combines excellent quality and vibrant color. This filament has the following characteristic details:

  • The color is a sweet Blue, adding a pleasant touch to your creations.
  • Developed from PLA, a material suitable for many applications and eco-friendly.
  • The package contains 1kg of filament, ideal for many prints.
  • The...
See full description See full description

  • Material

    PLA

    Easy-to-use material, environmentally friendly as it is produced from renewable sources. It is ideal for beginners due to its low printing temperature and minimal shrinkage.
  • Weight 1 kg
  • Diameter 1.75 mm
  • See all
The product is not available at Skroutz Last updated: 5 months ago
Product report

Description

Description

The Azurefilm offers a 3D filament that combines excellent quality and vibrant color. This filament has the following characteristic details:

  • The color is a sweet Blue, adding a pleasant touch to your creations.
  • Developed from PLA, a material suitable for many applications and eco-friendly.
  • The package contains 1kg of filament, ideal for many prints.
  • The diameter is 1.75mm, suitable for most 3D printers.

With the Azurefilm PLA filament, every print becomes a delightful experience with stunning results.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
FPL-OA0017
Material
PLA

Material

PLA

Easy-to-use material, environmentally friendly as it is produced from renewable sources. It is ideal for beginners due to its low printing temperature and minimal shrinkage.
Colour
Blue
Diameter
1.75 mm
Weight
1 kg
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (29)

Reviews

4.0
29
4.0
Review this product
  1. 16
  2. 2
  3. 7
  4. 3
  5. 1
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • John_Lafa
    2
    John_Lafa

    One of the worst spools I have ever printed
    6/10 prints the filament would break halfway through the print, maybe I just got a defective product.

    Translated from Greek ·
    0
  • sam230178
    5
    sam230178

    The quality of the thread is very high. It works very easily even with the basic settings. The result is both silk and metallic. There is nothing negative about it.

    Translated from Greek ·
    1
  • o_uperkatanalwths
    5
    o_uperkatanalwths

    Surprisingly good in both appearance and printing. Much better performance than what the price suggests, comparable to more expensive Marble type Bambu Labs. The only downside is that it doesn't print very quickly, but absolutely normal for its kind.

    Translated from Greek ·
    1
  • Filippos_K
    5
    Filippos_K

    I got this and the Olive Gold. Both printed very well on BambuLab P1S & X1C with the settings for Bambu Silk and slow outer layer for more gloss (Bambu Wiki - Silk PLA). At high speed, the color is more matte charcoal.

    Translated from Greek ·
    0
  • Theoκ
    2
    Theoκ

    Average quality. Its color is quite transparent for PLA. In texture and appearance, it resembles something between PLA and PETG, but that didn't bother me much since I used it for prints on figures and toys for my little one...

    The serious issue is with the winding. Just like the corresponding PETG from the same company.
    Irregular winding, tangled, jammed, and stuck on the edges of the spool, resulting in breakage.
    Unacceptable, I will definitely not prefer it again. Half of the spool and many prints ended up in the trash. Unsuitable, it can hardly be used and may cause some damage, it even caused the filament dryer to fall twice...
    Fortunately, it broke and the dryer didn't fall from the shelf to the floor.

    Translated from Greek ·
    2
  • See all

Description & Specifications

The Azurefilm offers a 3D filament that combines excellent quality and vibrant color. This filament has the following characteristic details:

  • The color is a sweet Blue, adding a pleasant touch to your creations.
  • Developed from PLA, a material suitable for many applications and eco-friendly.
  • The package contains 1kg of filament, ideal for many prints.
  • The diameter is 1.75mm, suitable for most 3D printers.

With the Azurefilm PLA filament, every print becomes a delightful experience with stunning results.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
FPL-OA0017
Material
PLA

Material

PLA

Easy-to-use material, environmentally friendly as it is produced from renewable sources. It is ideal for beginners due to its low printing temperature and minimal shrinkage.
Colour
Blue
Diameter
1.75 mm
Weight
1 kg
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (29)

4.0
29
4.0
Review this product
  1. 16
  2. 2
  3. 7
  4. 3
  5. 1
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • John_Lafa
    2
    John_Lafa

    One of the worst spools I have ever printed
    6/10 prints the filament would break halfway through the print, maybe I just got a defective product.

    Translated from Greek ·
    0
  • sam230178
    5
    sam230178

    The quality of the thread is very high. It works very easily even with the basic settings. The result is both silk and metallic. There is nothing negative about it.

    Translated from Greek ·
    1
  • o_uperkatanalwths
    5
    o_uperkatanalwths

    Surprisingly good in both appearance and printing. Much better performance than what the price suggests, comparable to more expensive Marble type Bambu Labs. The only downside is that it doesn't print very quickly, but absolutely normal for its kind.

    Translated from Greek ·
    1
  • Filippos_K
    5
    Filippos_K

    I got this and the Olive Gold. Both printed very well on BambuLab P1S & X1C with the settings for Bambu Silk and slow outer layer for more gloss (Bambu Wiki - Silk PLA). At high speed, the color is more matte charcoal.

    Translated from Greek ·
    0
  • Theoκ
    2
    Theoκ

    Average quality. Its color is quite transparent for PLA. In texture and appearance, it resembles something between PLA and PETG, but that didn't bother me much since I used it for prints on figures and toys for my little one...

    The serious issue is with the winding. Just like the corresponding PETG from the same company.
    Irregular winding, tangled, jammed, and stuck on the edges of the spool, resulting in breakage.
    Unacceptable, I will definitely not prefer it again. Half of the spool and many prints ended up in the trash. Unsuitable, it can hardly be used and may cause some damage, it even caused the filament dryer to fall twice...
    Fortunately, it broke and the dryer didn't fall from the shelf to the floor.

    Translated from Greek ·
    2
  • See all