Skroutz.mt

Güde Plasma Cutting Inverter 16A
Welding Machines

Güde Plasma Cutting Inverter 16A

Product: Plasma Cutter Güde GPS-E 40 A.2

  • Voltage: 230 V
  • Frequency: 50 Hz
  • Maximum output at 230 V: 5.79 kVA
  • Maximum welding current at 230 V: 15-40 A
  • Maximum cutting thickness: 12 mm
  • Dimensions: 407 ...

Product: Plasma Cutter Güde GPS-E 40 A.2

  • Voltage: 230 V
  • Frequency: 50 Hz
  • Maximum output at 230 V: 5.79 kVA
  • Maximum welding current at 230 V: 15-40 A
  • Maximum cutting thickness: 12 mm
  • Dimensions: 407 142 286 mm

The plasma cutter is suitable for cutting material with a maximum thickness of 12 mm. Ideal for home use. It can be used for copying and cutting...

See full description See full description

  • Welding Current

    16

    Suitable for use on thin sheets and DIY constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    5.79

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Product: Plasma Cutter Güde GPS-E 40 A.2

  • Voltage: 230 V
  • Frequency: 50 Hz
  • Maximum output at 230 V: 5.79 kVA
  • Maximum welding current at 230 V: 15-40 A
  • Maximum cutting thickness: 12 mm
  • Dimensions: 407 × 142 × 286 mm

The plasma cutter is suitable for cutting material with a maximum thickness of 12 mm. Ideal for home use. It can be used for copying and cutting creative shapes from paper or metal. In combination with a compressor with a minimum flow of 150 liters per minute, cutting metals and steel is quick and effortless.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
16 A

Welding Current (max): 16


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
20 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
5.79 kVA

Power: 5.79


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
-

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Product: Plasma Cutter Güde GPS-E 40 A.2

  • Voltage: 230 V
  • Frequency: 50 Hz
  • Maximum output at 230 V: 5.79 kVA
  • Maximum welding current at 230 V: 15-40 A
  • Maximum cutting thickness: 12 mm
  • Dimensions: 407 × 142 × 286 mm

The plasma cutter is suitable for cutting material with a maximum thickness of 12 mm. Ideal for home use. It can be used for copying and cutting creative shapes from paper or metal. In combination with a compressor with a minimum flow of 150 liters per minute, cutting metals and steel is quick and effortless.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
16 A

Welding Current (max): 16


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
20 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
5.79 kVA

Power: 5.79


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
-

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.