Skroutz.mt

Güde Welding Machine Inverter MIG with Maximum Welding Current 120A and Duty Cycle 10%
Welding Machines

Güde Welding Machine Inverter MIG with Maximum Welding Current 120A and Duty Cycle 10%

Welder SG 121 A-SYN, GUDE 20075

Professional welder with wire feed system. Features:

  • Synchronized, automatic wire feed mechanism for excellent results.
  • Ability to operate in manual mode if needed.
  • ...

Welder SG 121 A-SYN, GUDE 20075

Professional welder with wire feed system. Features:

  • Synchronized, automatic wire feed mechanism for excellent results.
  • Ability to operate in manual mode if needed.
  • Suitable for wire up to 0.9 mm (thin wire).
  • Analog welding current adjustment: 50 - 120 A.
  • Body made of painted steel.
  • Thermal overload protection.
  • Fan cooling.
...
See full description See full description

  • Welding Current

    120

    Suitable for use on thin sheets and DIY constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    6

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Welder SG 121 A-SYN, GUDE 20075

Professional welder with wire feed system. Features:

  • Synchronized, automatic wire feed mechanism for excellent results.
  • Ability to operate in manual mode if needed.
  • Suitable for wire up to 0.9 mm (thin wire).
  • Analog welding current adjustment: 50 - 120 A.
  • Body made of painted steel.
  • Thermal overload protection.
  • Fan cooling.

The package includes:

  • Mask with direct connection.
  • Grounding cable with clamp.
  • Ash hammer with brush and protective mask.
  • Wire spool (0.9 mm / 0.45 kg).
  • Replacement nozzles (3 x 0.9 mm).
  • Replacement wire spool (0.9 mm).

Technical specifications:

  • Power supply voltage: 230 V.
  • Power supply frequency: 50 Hz.
  • Protection class (IP): 21 S.
  • Insulation class: H.
  • No-load power consumption: 52 W.
  • Efficiency: 81 %.
  • Power supply capacity 230 V: 6 kVA.
  • Protection: 16 A.
  • Open circuit voltage: 86 V.
  • Welding current 230V: 120 A.
  • Adjusted welding current: 50 - 120 A.
  • Duty cycle with 230V supply: 120 ~ 20 A ~ %.
  • Recommended material thickness: 2 - 6 mm.
  • Wire thickness (with filling): 0.9 mm / max. 1 kg spool.
  • Length: 330 mm.
  • Width: 140 mm.
  • Height: 240 mm.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).
Welding Current (max)
120 A

Welding Current (max): 120


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
10 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
6 kVA

Power: 6


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Wire Diameter
0.9 mm

Maximum Wire Diameter: 0.9


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Welder SG 121 A-SYN, GUDE 20075

Professional welder with wire feed system. Features:

  • Synchronized, automatic wire feed mechanism for excellent results.
  • Ability to operate in manual mode if needed.
  • Suitable for wire up to 0.9 mm (thin wire).
  • Analog welding current adjustment: 50 - 120 A.
  • Body made of painted steel.
  • Thermal overload protection.
  • Fan cooling.

The package includes:

  • Mask with direct connection.
  • Grounding cable with clamp.
  • Ash hammer with brush and protective mask.
  • Wire spool (0.9 mm / 0.45 kg).
  • Replacement nozzles (3 x 0.9 mm).
  • Replacement wire spool (0.9 mm).

Technical specifications:

  • Power supply voltage: 230 V.
  • Power supply frequency: 50 Hz.
  • Protection class (IP): 21 S.
  • Insulation class: H.
  • No-load power consumption: 52 W.
  • Efficiency: 81 %.
  • Power supply capacity 230 V: 6 kVA.
  • Protection: 16 A.
  • Open circuit voltage: 86 V.
  • Welding current 230V: 120 A.
  • Adjusted welding current: 50 - 120 A.
  • Duty cycle with 230V supply: 120 ~ 20 A ~ %.
  • Recommended material thickness: 2 - 6 mm.
  • Wire thickness (with filling): 0.9 mm / max. 1 kg spool.
  • Length: 330 mm.
  • Width: 140 mm.
  • Height: 240 mm.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MIG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).
Welding Current (max)
120 A

Welding Current (max): 120


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
10 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
6 kVA

Power: 6


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Wire Diameter
0.9 mm

Maximum Wire Diameter: 0.9


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.