Skroutz.mt

D3-S4520 SSD 480GB 2.5'' SATA III Connection
SSD Hard Drives

D3-S4520 SSD 480GB 2.5'' SATA III Connection

The Solidigm D3-S4520 SSD is an internal 2.5″ drive with a SATA III interface and a capacity of 480 GB. It uses 3D NAND TLC flash memory and is designed for use in servers and workstations.

It offers...

The Solidigm D3-S4520 SSD is an internal 2.5″ drive with a SATA III interface and a capacity of 480 GB. It uses 3D NAND TLC flash memory and is designed for use in servers and workstations.

It offers sequential read speeds of up to 550 MB/s and write speeds of up to 460 MB/s. It features 256-bit AES hardware encryption, end-to-end data protection and...

See full description See full description

Top specs

  • Communication Protocol

    Most SSDs use SATA III or PCI Express.

    Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


    PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

    SATA III

    Modern hard drive connection standard.

    The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The Solidigm D3-S4520 SSD is an internal 2.5″ drive with a SATA III interface and a capacity of 480 GB. It uses 3D NAND TLC flash memory and is designed for use in servers and workstations.

It offers sequential read speeds of up to 550 MB/s and write speeds of up to 460 MB/s. It features 256-bit AES hardware encryption, end-to-end data protection and enhanced data protection in the event of power loss, and supports temperature monitoring and logging.

  • Capacity: 480 GB
  • Interface: SATA III
  • Type: Internal SSD
  • Form factor: 2.5″
  • NAND type: 3D NAND TLC
  • Cache type: DRAM-less
  • Sequential read speed: Up to 550 MB/s
  • Sequential write speed: Up to 460 MB/s
  • 4 KB random read: 79,000 IOPS
  • 4 KB random write: 30,000 IOPS
  • Write endurance: 2.5 PB total writes
  • MTBF: 2,000,000 hours
  • Encryption: 256-bit AES hardware encryption
  • Data protection: End-to-end and in the event of power loss
  • Temperature monitoring: Yes, with logging
  • Maximum power consumption: 3 W
  • Idle power consumption: 1.2 W
  • Operating temperature: 0–70 °C

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Capacity
480 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
Communication Protocol
SATA III

Communication Protocol

Most SSDs use SATA III or PCI Express.

Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

SATA III
Modern hard drive connection standard.

The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.
NVMe
No

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.
Cache Type
DRAM-less
NAND Flash Type
TLC

NAND Flash Type

The type of flash memory used by the SSD. It affects the drive's durability, performance, and cost.

TLC
The most common option, offering a very good balance between performance, durability, and cost.

Dimensions

Form Factor
2.5''

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

2.5''
The most classic size of SATA SSD hard drive.

HDD hard drives in laptops are of this size, so upgrading with an SSD is the right choice.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Solidigm D3-S4520 SSD is an internal 2.5″ drive with a SATA III interface and a capacity of 480 GB. It uses 3D NAND TLC flash memory and is designed for use in servers and workstations.

It offers sequential read speeds of up to 550 MB/s and write speeds of up to 460 MB/s. It features 256-bit AES hardware encryption, end-to-end data protection and enhanced data protection in the event of power loss, and supports temperature monitoring and logging.

  • Capacity: 480 GB
  • Interface: SATA III
  • Type: Internal SSD
  • Form factor: 2.5″
  • NAND type: 3D NAND TLC
  • Cache type: DRAM-less
  • Sequential read speed: Up to 550 MB/s
  • Sequential write speed: Up to 460 MB/s
  • 4 KB random read: 79,000 IOPS
  • 4 KB random write: 30,000 IOPS
  • Write endurance: 2.5 PB total writes
  • MTBF: 2,000,000 hours
  • Encryption: 256-bit AES hardware encryption
  • Data protection: End-to-end and in the event of power loss
  • Temperature monitoring: Yes, with logging
  • Maximum power consumption: 3 W
  • Idle power consumption: 1.2 W
  • Operating temperature: 0–70 °C

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Capacity
480 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
Communication Protocol
SATA III

Communication Protocol

Most SSDs use SATA III or PCI Express.

Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

SATA III
Modern hard drive connection standard.

The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.
NVMe
No

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.
Cache Type
DRAM-less
NAND Flash Type
TLC

NAND Flash Type

The type of flash memory used by the SSD. It affects the drive's durability, performance, and cost.

TLC
The most common option, offering a very good balance between performance, durability, and cost.

Dimensions

Form Factor
2.5''

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

2.5''
The most classic size of SATA SSD hard drive.

HDD hard drives in laptops are of this size, so upgrading with an SSD is the right choice.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Solidigm