Description
Specifications
Mariseal Aqua-primer is a transparent, rigid, two-component, water-based epoxy product. It is used to prepare absorbent, semi-absorbent and non-absorbent surfaces before applying waterproofing coatings and polyurethane joint sealants, as well as polyurethane or epoxy resin floor coatings.
Apply with a roller or brush. It can also be used as a bonding layer between coatings when the recommended recoat time has elapsed. Applied in three coats at a consumption rate of 0.600 kg/m², it serves as a primer and vapour barrier.
- Type: Two-component epoxy adhesion primer
- Base: Water-based
- Colour: Transparent
- Substrates: Polyurethane sealants and metal
- Application surfaces: Absorbent, semi-absorbent and non-absorbent
- Uses: Primer, vapour barrier and bonding layer between coatings
- Application: With a roller or brush
- Consumption as a primer: 0.100–0.200 kg/m² in one or two coats
- Consumption as a primer and vapour barrier: 0.600 kg/m² in three coats
- Pot life: 45–60 minutes
- Recoat time: 6–12 hours
- Full cure time: 7 days
- Properties: Adhesion; resistance to standing water, heat, frost and chemicals; helps limit dust formation
- Weight: 1 kg
- Product Number
- X026-0152-0001
Specifications
- Genre
- Primer
- Surface Material
- Polyurethane Sealant, Metal
- Surfaces
- Multiprimer
- Properties
- Adhesion, Water, Acrylic
Quantity
- Weight
- 1 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.