- Top Seller
- Top Seller
- Top Seller
Pulsar PoE Repeater EXT-POE4
from32,90 € at 2 storesDigitus Power Over Ethernet Injector Dn-95103-3 Gigabit Ethernet PoE+ 802.3at 30W
LAN Speed: 1000Mbps
from34,43 € at 5 storesUbiquiti Instant Indoor PoE Injector
from23,85 € at 4 storesTP-LINK Poe160s v4 PoE+ Injector
from28,66 € at 2 stores
Filters
Clear- Injector: Adds power to the network (Ethernet) cable. Used to power a PoE device (e.g. security camera) when your router or switch does not already provide power.
- Repeater: Works as a repeater. Extends the range of the network signal and PoE power beyond the standard 100-meter limit, without requiring an additional power outlet in between.
- Splitter: It does the opposite job of an injector. It takes the common PoE cable and "splits" the power from the data into two separate cables, allowing the powering of devices that are not PoE-enabled.
- 12V: It refers to splitters that step down the voltage to supply power to simple, non-PoE routers or switches that use the standard round 12-volt DC connector.
- 24V: Used exclusively in passive systems (e.g., specific outdoor Ubiquiti AirMax or MikroTik models). Warning: Do not connect it to Active 48V/54V devices.
- 48V: The most common voltage for standard access points, IP cameras, and VoIP phones. Supports the smart PoE standards (802.3af) and PoE+ (802.3at) with complete safety.
- 54V / 56V: High voltage for advanced or enterprise devices (such as modern Wi‑Fi 6/7 access points and PTZ cameras). Supports the powerful PoE++ standard (802.3bt) for maximum power.
- PoE+ (IEEE 802.3at): This specific standard allows for the transfer of up to 30W of power to the PoE device.
- PoE++ (IEEE 802.3bt): This specific standard allows for the transfer of up to 100W of power to the PoE device.
- PoE (IEEE 802.3af): This specific standard allows for the transfer of up to 15.4W of power to the PoE device.
- Gigabit (1000 Mbps): The most common choice. Ideal for most mainstream Access Points, high-definition (HD) cameras, and home networking devices.
- 2.5 Gbps: Critical for modern, fast Wi‑Fi 6 and Wi‑Fi 7 access points. It enables data transfer without delays and network bottlenecks.
- 10 Gbps: The maximum Ethernet speed. Unmatched for enterprise/corporate Access Points, high-end NAS (storage systems), servers, and network backbone connections.
- 5 Gbps: Ideal for advanced Wi-Fi 7 Access Points, fast switch ports (Multi-Gigabit), and premium networking equipment that requires high speeds without bottlenecks.
- Fast Ethernet (10/100 Mbps): Suitable for simple devices with low speed requirements, such as basic IP security cameras or fixed VoIP phones.