Vitex Hyroof Hybrid PU elastomeric waterproofing material, based on water-based acrylic polyurethane, is applied to rooftops and forms a seamless, elastic, impermeable membrane. It protects against moisture and standing water while covering microcracks and hairline cracks. It is ready to use and requires no dilution.
Apply in two crosswise coats using a roller, paintbrush, brush, block brush or airless spray gun. For waterproofing with protection lasting up to 10 years, use 50–100 g/m² reinforcing polyester fabric, embedding it in the coats while the surface is still wet. It is certified with European Technical Approval ETA 16/0755, in accordance with ETAG 005, and as a cold-applied roof coating.
- Capacity: 10 lt
- Colour: White
- Type: Elastomeric acrylic polyurethane waterproofing material
- Form: Brush-applied liquid
- Application surface: Rooftop
- Substrate materials: Bituminous membrane, concrete, cement slabs, acrylic and polyurethane paints
- Number of coats: 2
- Application method: Roller, paintbrush, brush, block brush or airless spray gun
- Touch-dry time: 2–3 hours
- Recoat time: 16–24 hours
- Application temperature: 5–35 °C
- Maximum relative humidity during application: 70%
- Initial total solar reflectance: SR 88% (300–2500 nm)
- Visible spectrum reflectance: SRvis 93%
- Solar reflectance: SRnir 89%
- Infrared emissivity: ε 0.87
- Solar Reflectance Index: SRI 111
- Certification: ETA 16/0755, ETAG 005
Product Details
- Type
- Lubricating Liquid
- Colour
- White
- Application Surface
- Terrace
- Application Surface Material
- Bituminous Membrane
Additional Specifications
- Polyurethane
- Yes
- Elastomer
- Yes
- Acrylic
- Yes
- Bituminous
- No
- Cementitious
- No
- 2-Component
- No
Packaging
- Capacity
- 10 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.