Vivechrom Vivecryl Primer is a silicone-modified acrylic micronized water-based primer for porous masonry surfaces such as plaster, concrete, brick and stone. It waterproofs and strengthens the surface while allowing it to breathe. It is used as a primer for silicone-based, elastomeric and acrylic paints, waterproofing products, cement paints and RELIEF.
Its water-repellent action helps limit salt migration to the topcoat and rising damp from the ground. It offers strong adhesion, excellent penetration and resistance to alkaline substrates. Its slightly yellow tint makes it easier to check coverage during application.
- Type: Silicone-modified acrylic micronized water-based primer
- Suitable for: Interior and exterior masonry
- Substrates: Plaster, concrete, brick, stone and old, poor-quality paintwork
- Coverage: 10–15 m²/l per coat, depending on absorbency and dilution
- Dilution for walls: Up to 50% with clean water, or undiluted on highly absorbent surfaces
- Dilution for roofs: Up to 30% with clean water
- Touch dry: 1 hour
- Recoat: After 4 hours
- Finish: Matt
- Application and drying temperature: 10–35 °C
- VOC content: Up to 2 g/l
- Odour: Odourless
- Volume: 5 l
- Application: With a roller, brush or airless spray gun
- Tool cleaning: With water and detergent immediately after use
- Product Number
- 5175080
Specifications
- Genre
- Primer
- Surface Material
- Masonry
- Surfaces
- Multiprimer
- Properties
- Acrylic, Water, Silicone
Quantity
- Mass Gaining
- 5 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.