Skroutz.mt

Azurefilm PLA 3D Printer Filament 1.75mm Champagne Gold 1kg FPL-OA0071
3D Printer Filament

Azurefilm PLA 3D Printer Filament 1.75mm Champagne Gold 1kg FPL-OA0071 Code: FPL-OA0071

Azurefilm PLA is ideal for creating impressive 3D prints. It has a diameter of 1.75mm and is made from PLA, an environmentally friendly material derived from renewable sources. It is an excellent...

Azurefilm PLA is ideal for creating impressive 3D prints. It has a diameter of 1.75mm and is made from PLA, an environmentally friendly material derived from renewable sources. It is an excellent choice for beginners, as it offers easy use with a low printing temperature and minimal shrinkage.

Its color is a soft gold, ideal for designs that require a...

See full description See full description

Top specs

  • Material

    PLA

    Easy-to-use material, environmentally friendly as it is produced from renewable sources. It is ideal for beginners due to its low printing temperature and minimal shrinkage.
  • Weight 1 kg
  • Diameter 1.75 mm
  • See all

Filament packaging

  1. Spool

    from 55,94 €

  2. Refill

    Unavailable

This product is temporarily unavailable at Skroutz Last updated: 1 day ago
Product report

Description

Description

Azurefilm PLA is ideal for creating impressive 3D prints. It has a diameter of 1.75mm and is made from PLA, an environmentally friendly material derived from renewable sources. It is an excellent choice for beginners, as it offers easy use with a low printing temperature and minimal shrinkage.

Its color is a soft gold, ideal for designs that require a refined appearance. Please note that the filament is sold without a spool, so you need a reusable spool for proper installation and use.

  • Material: PLA
  • Weight: 1kg
  • Diameter: 1.75mm
  • Packaging: Without spool (Refill)
  • Color: Gold

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
FPL-OA0071
Material
PLA

Material

PLA

Easy-to-use material, environmentally friendly as it is produced from renewable sources. It is ideal for beginners due to its low printing temperature and minimal shrinkage.
Colour
Gold
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Refill

Filament Packaging

Refill
The filament is provided without a spool. A reusable spool is required to place and use it.
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (30)

Reviews

4.0
30
4.0
Review this product
  1. 17
  2. 2
  3. 7
  4. 3
  5. 1
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • John_Lafa
    2
    John_Lafa

    One of the worst spools I have ever printed
    6/10 prints the filament would break halfway through the print, maybe I just got a defective product.

    Translated from Greek ·
    0
  • sam230178
    5
    sam230178

    The quality of the thread is very high. It works very easily even with the basic settings. The result is both silk and metallic. There is nothing negative about it.

    Translated from Greek ·
    1
  • o_uperkatanalwths
    5
    o_uperkatanalwths

    Surprisingly good in both appearance and printing. Much better performance than what the price suggests, comparable to more expensive Marble type Bambu Labs. The only downside is that it doesn't print very quickly, but absolutely normal for its kind.

    Translated from Greek ·
    1
  • Filippos_K
    5
    Filippos_K

    I got this and the Olive Gold. Both printed very well on BambuLab P1S & X1C with the settings for Bambu Silk and slow outer layer for more gloss (Bambu Wiki - Silk PLA). At high speed, the color is more matte charcoal.

    Translated from Greek ·
    0
  • Theoκ
    2
    Theoκ

    Average quality. Its color is quite transparent for PLA. In texture and appearance, it resembles something between PLA and PETG, but that didn't bother me much since I used it for prints on figures and toys for my little one...

    The serious issue is with the winding. Just like the corresponding PETG from the same company.
    Irregular winding, tangled, jammed, and stuck on the edges of the spool, resulting in breakage.
    Unacceptable, I will definitely not prefer it again. Half of the spool and many prints ended up in the trash. Unsuitable, it can hardly be used and may cause some damage, it even caused the filament dryer to fall twice...
    Fortunately, it broke and the dryer didn't fall from the shelf to the floor.

    Translated from Greek ·
    2
  • See all

Description & Specifications

Azurefilm PLA is ideal for creating impressive 3D prints. It has a diameter of 1.75mm and is made from PLA, an environmentally friendly material derived from renewable sources. It is an excellent choice for beginners, as it offers easy use with a low printing temperature and minimal shrinkage.

Its color is a soft gold, ideal for designs that require a refined appearance. Please note that the filament is sold without a spool, so you need a reusable spool for proper installation and use.

  • Material: PLA
  • Weight: 1kg
  • Diameter: 1.75mm
  • Packaging: Without spool (Refill)
  • Color: Gold

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
FPL-OA0071
Material
PLA

Material

PLA

Easy-to-use material, environmentally friendly as it is produced from renewable sources. It is ideal for beginners due to its low printing temperature and minimal shrinkage.
Colour
Gold
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Refill

Filament Packaging

Refill
The filament is provided without a spool. A reusable spool is required to place and use it.
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (30)

4.0
30
4.0
Review this product
  1. 17
  2. 2
  3. 7
  4. 3
  5. 1
Review this product

Reviews photos

Reviews photos
Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • John_Lafa
    2
    John_Lafa

    One of the worst spools I have ever printed
    6/10 prints the filament would break halfway through the print, maybe I just got a defective product.

    Translated from Greek ·
    0
  • sam230178
    5
    sam230178

    The quality of the thread is very high. It works very easily even with the basic settings. The result is both silk and metallic. There is nothing negative about it.

    Translated from Greek ·
    1
  • o_uperkatanalwths
    5
    o_uperkatanalwths

    Surprisingly good in both appearance and printing. Much better performance than what the price suggests, comparable to more expensive Marble type Bambu Labs. The only downside is that it doesn't print very quickly, but absolutely normal for its kind.

    Translated from Greek ·
    1
  • Filippos_K
    5
    Filippos_K

    I got this and the Olive Gold. Both printed very well on BambuLab P1S & X1C with the settings for Bambu Silk and slow outer layer for more gloss (Bambu Wiki - Silk PLA). At high speed, the color is more matte charcoal.

    Translated from Greek ·
    0
  • Theoκ
    2
    Theoκ

    Average quality. Its color is quite transparent for PLA. In texture and appearance, it resembles something between PLA and PETG, but that didn't bother me much since I used it for prints on figures and toys for my little one...

    The serious issue is with the winding. Just like the corresponding PETG from the same company.
    Irregular winding, tangled, jammed, and stuck on the edges of the spool, resulting in breakage.
    Unacceptable, I will definitely not prefer it again. Half of the spool and many prints ended up in the trash. Unsuitable, it can hardly be used and may cause some damage, it even caused the filament dryer to fall twice...
    Fortunately, it broke and the dryer didn't fall from the shelf to the floor.

    Translated from Greek ·
    2
  • See all